EP19-GROUT
High-Strength Epoxy Grout
A high-strength epoxy grout used primarily when extreme early compressive strength is required. With past experience using this grout and results greater than 20,000 PSI in 24 hours, it is a game changer for the extra large compressor...
EP20-CHOCK
Epoxy Machine Grout
EP20-CHOCK is a two-component, 100% solids, high performance epoxy machine chock. It is characterized by high early and ultimate strength, high bearing area, negligible shrinkage and creep, fast cure and excellent flowability.
EP50-OVERLAY
Low Modulus Polymer Resin Overlay
EP50-OVERLAY is a solvent-free, moisture-insensitive, 100% solids, low-modulus, two-component polymer designed primarily for bonding skid-resistant overlays.
EP75-SEAL
Penetrating Healer and Urethane Sealer
EP75-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.
EPO-TEK® 301
Low Viscosity Optical Grade Epoxy
Room temperature curing epoxy featuring very low viscosity, clear and excellence optical-mechanical properties.
EPO-TEK® 301-1
Spectrally Transparent Epoxy
This is a two-component, room temperature curing epoxy featuring very low viscosity and excellent optical and mechanical properties. It is a lower viscosity version of EPO-TEK® 301.
EPO-TEK® 301-2
Optically Transparent Epoxy Resin
Optically transparent and semiconductor grade epoxy resin with low viscosity, long pot life and good handling characteristics.
EPO-TEK® 301-2FL-CX
Low Viscosity Optical Epoxy
This a two component optical epoxy low index version of EPO-TEK® 301-2FL. It features very low viscosity and excellent optical-mechanical properties.
EPO-TEK® 301-2FL-LY
Optical Epoxy
A two-component, optical and semiconductor grade epoxy. It is a lower yellowing version of EPO-TEK® 301-2FL.
