Convergent

Not only is it remarkably easy to apply, but it can be applied at temperatures as low as 25°F – and no rinsing is required, making it not only simple but also easy on the environment. It can...

Pentra-Sil® (HL) is a high-solids blended hybrid lithium densifier designed for concrete densifying and hardening in newly placed or existing slabs. Its reactive formulation fills the micro-pores of the concrete, strengthening the surface and prolonging its life. Pentra-Sil®...

Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...

Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...

Pentra-Sil® (HD) is a high-performance lithium densifier that provides optimal hardening to improve abrasion and stain resistance and reduce dusting. Easy to use. Provides easier maintenance and longer concrete life. Pentra-Sil® (HD) is best for existing concrete surfaces...

Pentra-Sil® (244+) is a high-performance lithium hardener, densifier and sealer. It is formulated to protect existing concrete against damage from salt, freeze-thaw, moisture and steel corrosion. Pentra-Sil® (244+) reduces chloride ion intrusion, dustproofs, hardens and fortifies the surface....

Pentra-Finish® (HG) is an advanced, high-gloss, fast-drying lithium sealer that creates a microfilm on polished concrete, stone, terrazzo, masonry and other cementitious surfaces. This easy-to-use finish increases shine, enhances color and improves resistance against abrasion and stains. Pentra-Finish®...

STRiON:Fortify is a revolutionary new method of concrete densification and hardening. Using groundbreaking new silica-free technology, STRiON relies on an ionic transfer process to disperse deep into concrete to make it more resilient, resistant to traffic, dustproof, easy...

Not only is it remarkably easy to apply, but it can be applied at temperatures as low as 25°F – and no rinsing is required, making it not only simple but also easy on the environment. It can...

Pentra-Sil® (HL) is a high-solids blended hybrid lithium densifier designed for concrete densifying and hardening in newly placed or existing slabs. Its reactive formulation fills the micro-pores of the concrete, strengthening the surface and prolonging its life. Pentra-Sil®...

STRiON:Fortify is a revolutionary new method of concrete densification and hardening. Using groundbreaking new silica-free technology, STRiON relies on an ionic transfer process to disperse deep into concrete to make it more resilient, resistant to traffic, dustproof, easy...

Pentra-Sil® (HD) is a high-performance lithium densifier that provides optimal hardening to improve abrasion and stain resistance and reduce dusting. Easy to use. Provides easier maintenance and longer concrete life. Pentra-Sil® (HD) is best for existing concrete surfaces...

Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...

Pentra-Sil® (244+) is a high-performance lithium hardener, densifier and sealer. It is formulated to protect existing concrete against damage from salt, freeze-thaw, moisture and steel corrosion. Pentra-Sil® (244+) reduces chloride ion intrusion, dustproofs, hardens and fortifies the surface....

Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...

Pentra-Cure™ (MH) is an eco-friendly, all-in-one treatment that cures, hardens and densifies fresh concrete with one application. It provides long-term protection for commercial and industrial floors against heavy wear and abuse. This unique solution forms a membrane on...

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

Pentra-Sil® (HDS) is engineered for polished, colored, dyed or acid-stained cementitious surfaces and is ideal for polishing and restoring worn and damaged flooring. This eco-friendly lithium solution hardens, densifies, and seals concrete, overlays, and terrazzo. It enhances color,...

SlabArmor™ Starter is a colloidal silica concrete curing/finishing aid and hardener used in the placement and finishing of new concrete. Its hydrophilic property holds bleed water in the capillaries of the concrete slab during the curing process, reducing...

SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

Pentra-Finish® (HG) is an advanced, high-gloss, fast-drying lithium sealer that creates a microfilm on polished concrete, stone, terrazzo, masonry and other cementitious surfaces. This easy-to-use finish increases shine, enhances color and improves resistance against abrasion and stains. Pentra-Finish®...

Pentra-Guard® (EXT) is an eco-friendly, exterior stone sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing the natural color and shine. This treatment creates a breathable, protective...

Pentra-Pel™ (SI) is a penetrating lithium stain guard designed for interior or exterior concrete, stone and masonry surfaces. This product creates a protective barrier that resists staining. It densifies, seals, and repels while maintaing breathability and doesn’t alter...

COLORFAST™ Stain is a chemically reactive, Nano-Lithium® enhanced product that creates beautiful, durable colored concrete. High-solids treatment utilizes lithium densifier to harden and protect both interior and exterior slabs. COLORFAST™ Stain is an ideal solution for all construction...

COLORFAST™ Finish is a high-performance finish that enhances the appearance and extends the longevity of polished, integrally colored, dyed and stained concrete, providing shine, stain resistance and abrasion resistance. Effective on concrete and cementitious surfaces that are stained...

COLORFAST™ Gloss is an eco-friendly, high-solids exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while providing a “wet look” gloss that enhances natural color and shine. This...

Pentra-Clean™ (CR) cleans floors by cutting through dirt, grime and residue while using reactive Nano-Lithium® to harden, protect and restore gloss and durability. Cleaning with Pentra-Clean™ (CR) increases the floor’s longevity, reducing maintenance and costly repairs. Ideal for...

Pentra-Clean™ (DC) Daily Cleaner easily removes stains, dirt, grease and grime from concrete, terrazzo, natural stone and tile floor surfaces. This product is easy to use, leaves no film or residue and has a neutral pH with no...

Pentra-Sil® (AC) is an advanced alkalinity control treatment that reacts with concrete to neutralize its pH levels. Through this permanent reaction, slab sweating and efflorescence is significantly reduced. The lithium silicate in this product also densifies and hardens...

Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate. 

Pentra® (PCF) is an industry-leading liquid pore and micro-crack filler for concrete grinding and polishing. This reactive treatment mixes with the dust created during concrete grinding to fill pinholes, microcracks and other imperfections in the concrete surface. It...

Pentra-Melt™ is a fast-acting de-icer for concrete driveways, sidewalks, ramps, steps, loading docks and decks. This industrial strength formula melts ice on contact as low as -40 ºF (-40 ºC). It works to separate ice from the surface,...