Pentra-Sil® (244+) | Lithium Densifier and Concrete Sealer

Features

Engineered for parking and maintenance facilities
Protects against salt and freeze/thaw damage
Hardens, densifies and dust-proofs
Uses patented Nano-Lithium® technology
Easy to use, low odor, no rinsing required
Defends against water and harmful substances
Not susceptible to UV damage
Breathable: allows moisture to escape without damage to the surface
Penetrates: no film to lift or peel off
Reduces efflorescence and surface sweating
Does not contribute to surface ASR or promote crazing
VOC compliant, may contribute to LEED points (IEQ credit)

Properties

Meets NCHRP 244 Standard for Chloride Intrusion

Application method

Sprayer

Color

Red tint, dries clear

Coverage Rate

Machine-troweled: 600-800 ft² per gallon (14.7-19.6 m² per liter) Broom-finished: 250-350 ft² per gallon (6.1-8.6 m² per liter)

Film-forming

Form

Liquid

Freeze point

32 ºF (0 ºC)

Odor

Slight to none

11-12

Shelf life

1 year in unopened, sealed container

Specific gravity

1.1

Total solids

17.1%

VOC content

<50g/L

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name Pentra-Sil® (244+) SDS

File Size 202.0 KB

View

Technical Data Sheet

Document Name Pentra-Sil® (244+) TDS

File Size 2.2 MB

View

Brand:

Adhesives Technology

Technology:

Lithium, Colloidal & Strontium

Application:

Building Envelope and Components

Market:

Building Construction Infrastructure

Available Packaging

Size

Part Number

Quantity

Picture

Size 1 Gallon Jug

Part Number CCT-060-1

Quantity 126

Picture

Size 5 Gallon Pail

Part Number CCT-060-5

Quantity 35

Picture

Size 55 Gallon Drum

Part Number CCT-060-55

Quantity 4

Picture

Size 275 Gallon Tote

Part Number CCT-060-275

Quantity 1

Picture

Related Products

Viewing options:

CONVERGENT SlabArmor™ Closer

Colloidal Silica Concrete Densifier/Hardener

SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...

SDS TDS

CONVERGENT SlabArmor™ Seal&Shine Finish

High-Performance, High-Gloss Concrete Finisher and Sealer

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

SDS TDS

CONVERGENT Pentra-Shield®

Hardener, Densifier & Sealer

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

SDS TDS

CONVERGENT Pentra-Sil® (H)

Single-Application Hardener for Slabs and Tilt-Up

Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...

SDS TDS

CONVERGENT STRiON:FORTIFY

Revolutionary spray-on, silica-free densifier

STRiON:Fortify is a revolutionary new method of concrete densification and hardening. Using groundbreaking new silica-free technology, STRiON relies on an ionic transfer process to disperse deep into concrete to make it more resilient, resistant to traffic, dustproof, easy...

SDS TDS

CONVERGENT Pentra-Cure® (MH)

All-In-One Cure, Hardener and Densifier

Pentra-Cure™ (MH) is an eco-friendly, all-in-one treatment that cures, hardens and densifies fresh concrete with one application. It provides long-term protection for commercial and industrial floors against heavy wear and abuse. This unique solution forms a membrane on...

SDS TDS