CONVERGENT SlabArmor™ Closer

Features

UL 2818 – 2022 GreenGuard Gold Certification for low chemical emissions - Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings
Provides additional hardening and seals surface after SlabArmor Starter™ application
Increases abrasion resistance
Nanoparticle silica fully-penetrates with no film to remove
Eliminates concrete dusting
Low pH reduces surface alkalinity
Contains no soluble salts
Water repellency
Environmentally friendly, water-based formula/VOC compliant

Properties

Active Ingredients

100% of total solids

Specific Gravity

1.071

Weight/Gallon

8.43 lbs

11.25

VOC Content

<50g/L

Flash Point

N/A

Freeze Point

32 ºF (0 ºC)

Shelf Life

2 years in unopened, sealed container

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name CONVERGENT SlabArmor™ Closer SDS

File Size 322.6 KB

View

Technical Data Sheet

Document Name CONVERGENT SlabArmor™ Closer TDS

File Size 575.8 KB

View

Miscellaneous

Document Name CONVERGENT SlabArmor™ Best Practices flyer

File Size 1.3 MB

View

Certifications

Brand:

Adhesives Technology

Technology:

Lithium, Colloidal & Strontium

Application:

Building Envelope and Components

Market:

Building Construction Infrastructure

Available Packaging

Size

Part Number

Quantity

Picture

Size 5 Gallon Pail

Part Number CCT-113-5

Quantity 35

Picture

Size 55 Gallon Drum

Part Number CCT-113-55

Quantity 4

Picture

Size 275 Gallon Tote

Part Number CCT-113-275

Quantity 1

Picture

Related Products

Viewing options:

CONVERGENT SlabArmor™ Seal&Shine Finish

High-Performance, High-Gloss Concrete Finisher and Sealer

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

SDS TDS

CONVERGENT Pentra-Cure® (MH)

Concrete Cure, Hardener and Densifer

Pentra-Cure™ (MH) is an eco-friendly, all-in-one treatment that cures, hardens and densifies fresh concrete with one application. It provides long-term protection for commercial and industrial floors against heavy wear and abuse. This unique solution forms a membrane on...

SDS TDS

CONVERGENT Pentra-Shield®

Exterior Concrete Sealer

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

SDS TDS

DP 1030

Water Based Duct Sealant

A UL Listed, Low VOC, fiber reinforced, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1030 allows for easier sealing of holes and gaps often...

TDS

DP 2585

Polystyrene Foam Spray Adhesive

A premium quality, solvent based, high performance, fast drying, polystyrene insulation adhesive. DP 2585 is water resistant and temperature resistant to 180° F. It is ideal for bonding polystyrene, polyisocyanurate and phenolic foam insulation sheets and block without...

SDS TDS

DP 2540 – Black / DP 2545 – White

Protective Coating for Fiberglass

A water based protective coating formulated with an EPA Registered preservative that prevents the growth of mold, mildew, and fungus on the surface of the coating. It is recommended as an encapsulant on worn or damaged fiberglass to...