Features
Properties
Downloads
Safety Data Sheet
Available Packaging
Related Products
ULTRABOND® EPX-3CC
High Performance Epoxy Anchor Adhesive
ULTRABOND® EPX-3CC is everything you need, and nothing you don’t, because it’s the perfect balance between high performance and high volume. With an installation temperature range of 48 °F to 108 °F, and a full cure in 4...
EP-SLV
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...
EP19-GROUT
High-Strength Epoxy Grout
A high-strength epoxy grout used primarily when extreme early compressive strength is required. With past experience using this grout and results greater than 20,000 PSI in 24 hours, it is a game changer for the extra large compressor...
CONVERGENT Pentra-Sil® (AC)
pH Neutralizing Densifier and Hardener
Pentra-Sil® (AC) is an advanced alkalinity control treatment that reacts with concrete to neutralize its pH levels. Through this permanent reaction, slab sweating and efflorescence is significantly reduced. The lithium silicate in this product also densifies and hardens...
ULTRABOND® ACRYL-8CC
Fast Cure Anchoring Adhesive
For use in cracked and uncracked normal weight and lightweight concrete, ULTRABOND ACRYL-8CC has a full cure rate of 45 minutes at 70° F (21° C) and an 18-month shelf life. With an extended in-service temperature range of...
CRACKBOND® 2100 MV & MV-LPL
High Strength Epoxy Adhesive
CRACKBOND® 2100 MV (Medium Viscosity, a product formerly known as ULTRABOND® 2100) and 2100 MV-LPL (Medium Viscosity – Long Pot Life) products are two-component, high-strength epoxy adhesives that are ideal for bonding fresh to hardened concrete or perfect...
Get in touch to learn more
Speak to us on 800-892-1880
Contact us