2037 is a clear set, solvent-free, pressure sensitive adhesive for the installation of fiberglass-backed sheet goods over approved substrates. Fast drying for quick installation, flooring can be installed up to 24 hours after application.
Taylor 2037 can be used over the following: above, on, or below grade concrete in the absence of excessive moisture and alkalinity; association grade plywood underlayment; association grade particleboard underlayment; existing-well bonded resilient flooring; poured in place and primed gypsum subfloors; radiant heated subfloors where surface temperatures do not exceed 85°F (20.40°C), and terrazzo. Extremely porous subfloors should be primed with Taylor 2025 prior to the application of the Taylor 2037. The pH level of concrete must be between 5 and 9 (do not install if over 9) and moisture level of concrete must be below 5 lbs./1000 sq. ft./24 hours using an anhydrous calcium chloride test kit according to ASTM F-1869 test method. Relative Humidity readings according to ASTM F-2170 should not exceed (RH) 85%. If both tests are performed the RH test is the qualifying standard.
Part NumberPlastic Pail with Plastic Lid and Metal Handle
Quantity1
Picture
Size
1 Gallon
Part NumberPlastic Pail with Plastic Lid and Metal Handle
Quantity1
Picture
Related Products
Viewing options:
2062
Seam Sealer: Fiberglass Sheet
2062 is a solvent-free seam sealer designed for use with fiberglass sheet in direct glue-down installations. This synthetic latex blend is non-flammable and easy-to-clean.
Reliability often comes at a price, but with Steadfast, the benefits far outweigh the cost. Steadfast changes the game with its ability to handle light traffic immediately after installation. With its strong, water-resistant bond, it gives you confidence...
When it comes to ultimate adaptability for numerous flooring types, Dynamic holds the market. Breaking all the rules, this revolutionary product saves time with its instant access for light traffic. Dynamic provides the superior bond-strength of a fully...
Chasing moisture can cost valuable time and money, but with Resolute, you can stop it in its tracks. Designed with safe, single-part, moisture-cured chemistry, Resolute is a faster, more installer friendly alternative to two-part epoxy systems. Resolute is...
Aspen keeps you firmly grounded with both its price and performance. Created to offer an alternative to traditional urethane-based adhesives, Aspen is an easy-to-clean, low-odor, isocyanate-free solution. With its early grab, fast-curing formula and tenacious bond, Aspen reduces...
2062 is a solvent-free seam sealer designed for use with fiberglass sheet in direct glue-down installations. This synthetic latex blend is non-flammable and easy-to-clean.
Reliability often comes at a price, but with Steadfast, the benefits far outweigh the cost. Steadfast changes the game with its ability to handle light traffic immediately after installation. With its strong, water-resistant bond, it gives you confidence...
When it comes to ultimate adaptability for numerous flooring types, Dynamic holds the market. Breaking all the rules, this revolutionary product saves time with its instant access for light traffic. Dynamic provides the superior bond-strength of a fully...
Chasing moisture can cost valuable time and money, but with Resolute, you can stop it in its tracks. Designed with safe, single-part, moisture-cured chemistry, Resolute is a faster, more installer friendly alternative to two-part epoxy systems. Resolute is...
Aspen keeps you firmly grounded with both its price and performance. Created to offer an alternative to traditional urethane-based adhesives, Aspen is an easy-to-clean, low-odor, isocyanate-free solution. With its early grab, fast-curing formula and tenacious bond, Aspen reduces...