Features
- Broad Adhesion Range
- Mold & Mildew Resistant
- Resistant To UV Degradation & Weathering
- Withstands Extreme Cold & Extreme Heat
- One-Component, Easy To Use Formulation
- Adheres To Most Common Building Substrates
- Easy To Extrude At Cold Temperatures
- Non-Slump, Can Use On Overhead & Vertical Applications
- Excellent For Indoor & Outdoor Applications
- Creates A Waterproof Seal
Benefits
- Broad Adhesion Range/Bonds to Common Substrates
- Chemical Resistant
- Color Stable
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Excellent for Indoor and Outdoor Applications
- High Temperature Resistance
- Highly Flexibile/Allows for Movement
- Long Life
- Low Temperature Resistance
- Moisture Curing
- Mold and Mildew Resistant
- Non-Slump – Overhead/Vertical Applications
- Non-Yellowing
- One-Component
- Rain Ready
- UV Resistant/Degredation
- VOC Compliant
- Water Repellant
- Weather Resistant
- Will Not Crack
- Withstands Extreme Temperatures
Properties
- *Intermittent temperature up to 450°F. Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. ASI 504 suggested application temperature range: -35°F to 150°F. Testing should be done to confirm temperature requirements are met. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department.
Substrates
- Glass
- Metal
- Some Fiberglass
- Some Plastics
- Most Wood Types
- Aluminum
- Ceramic
- Most Painted Surfaces
- Natural & Synthetic Fiber
Downloads
Certifications
- ASTM C920 Class 25, Type S, Grade NS, Use NT, G, O
- TT-S-01543A
- TT-S-00230-C
- MIL-A-46106A
- VOC Compliant (23 grams/liter ASTM D2369)
Additional information
ADDITIONAL COMMON APPLICATIONS
- Walk-In Freezer Manufacturing & Installation
- RV & Trailer Manufacturing
- Sealing Precast Concrete Forms
- Industrial Manufacturing Applications
- Bathroom Installation & Sealing
- HVAC Applications
- Fireplace Manufacturing
- Appliance Manufacturing
- Sheet Metal Work & Sealing
- General Sealing & Bonding Applications
- Plumbing Applications
Available Packaging
Notes
ASI 504 is stocked in cartridges, pails and drums. Additional packaging may be available upon request. Inquire to ASI sales staff for additional information.
Related Products

DP 2595
Closed Cell Foam Spray Adhesive
A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...

ASI 0240
Adhesive Remover and Cleaner
ASI 0240 is a multi-use, sprayable liquid that can used when tooling sealants/caulk to more rapidly create a professional, clean looking seal. ASI 0240 also serves as a remover for all types of caulks, sealants, labels, capes and...

Dextrin Adhesives
Evans Adhesive dextrin products provide high-performance bonding for packaging, labeling, and paper converting. Known for their versatility, they offer consistent adhesion and easy application across a range of industrial uses.

CONVERGENT Pentra-Clean™ (CR)
Concrete Floor Hardener and Cleaner
Pentra-Clean™ (CR) cleans floors by cutting through dirt, grime and residue while using reactive Nano-Lithium® to harden, protect and restore gloss and durability. Cleaning with Pentra-Clean™ (CR) increases the floor’s longevity, reducing maintenance and costly repairs. Ideal for...

CONVERGENT Pentra-Shield®
Exterior Concrete Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

DP SEAM SEALANT
Non Curing Seam Sealant
A non-curing, non-skinning, solvent based pumpable butyl injection seam sealant ideal for sealing seams in Pittsburgh, Button Punch, Snap Lock and roll formed seams. DP Seam Sealant is ideal for coil line applications.Non-curing and non-skinning.Permanently pliable.
DP 2595
Closed Cell Foam Spray Adhesive
A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...
ASI 0240
Adhesive Remover and Cleaner
ASI 0240 is a multi-use, sprayable liquid that can used when tooling sealants/caulk to more rapidly create a professional, clean looking seal. ASI 0240 also serves as a remover for all types of caulks, sealants, labels, capes and...
Dextrin Adhesives
Evans Adhesive dextrin products provide high-performance bonding for packaging, labeling, and paper converting. Known for their versatility, they offer consistent adhesion and easy application across a range of industrial uses.
CONVERGENT Pentra-Clean™ (CR)
Concrete Floor Hardener and Cleaner
Pentra-Clean™ (CR) cleans floors by cutting through dirt, grime and residue while using reactive Nano-Lithium® to harden, protect and restore gloss and durability. Cleaning with Pentra-Clean™ (CR) increases the floor’s longevity, reducing maintenance and costly repairs. Ideal for...
CONVERGENT Pentra-Shield®
Exterior Concrete Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...
DP SEAM SEALANT
Non Curing Seam Sealant
A non-curing, non-skinning, solvent based pumpable butyl injection seam sealant ideal for sealing seams in Pittsburgh, Button Punch, Snap Lock and roll formed seams. DP Seam Sealant is ideal for coil line applications.Non-curing and non-skinning.Permanently pliable.


Get in touch to learn more
Speak to us on 800-325-7040
Contact us

















