Features
- Wide Variety of Substrates
- Advanced Adhesion Properties
- Resistant To UV Degradation & Weathering
- Resists Extreme Temperatures & Chemicals
- One-Component, Easy To Use Formulation
- 25% Joint Movement Capability
- Mold & Mildew Resistant
- Easy To Extrude At Cold Temperatures
- Non-Slump, Can Use On Overhead & Vertical Applications
- Excellent For Indoor & Outdoor Applications
- Creates A Waterproof Seal
Benefits
- 100% Silicone
- 100% Solids/Will Not Shrink
- Chemical Resistant
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Excellent Adhesion
- Excellent for Indoor and Outdoor Applications
- Long Life
- Low Odor
- Moisture Curing
- Mold and Mildew Resistant
- Non-Corrosive
- Non-Slump – Overhead/Vertical Applications
- Non-Yellowing
- One-Component
- Rain Ready
- RTV
- Solvent-Free
- UV Resistant/Degredation
- VOC Compliant
- Will Not Crack
- Withstands Extreme Temperatures
Properties
- *Intermittent temperature up to 450°F. Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department.
Substrates
- Glass
- Concrete, Brick, Mortar (porous substrates)
- Marble & Granite
- Most Metals
- Most Types Of Woods
- Most Fiberglass
- Aluminum
- Ceramic
- Natural & Synthetic Fiber
- Most Painted Surfaces
- Some Plastics
Downloads
Certifications
- ASTM C920 Class 35, Type S, Grade NS, Use NT, G, A, O
- ASTM C920 Class 25, Type S, Grade NS, Use NT, G, O
- TT-S-01543A
- TT-S-00230-C
- VOC Compliant (21 grams/liter ASTM D2369)
- Meets the requirements of MIL 46106B Type 1
Additional information
ADDITIONAL COMMON APPLICATIONS
- Walk-In Freezer Manufacturing & Installation
- RV & Trailer Manufacturing
- Vinyl, Metal & Aluminum
- Siding & Roofing
- Fiberglass Waterproof Sealing
- Industrial Manufacturing
- Applications
- Concrete Joint Sealant
- HVAC Applications
- Glass Glazing
- Glass Block Installation
- Sheet Metal Work & Sealing
- Marine Applications
- General Sealing & Bonding Applications
Available Packaging
Notes
ASI 335 is stocked in cartridges, pails and drums. Additional packaging may be available upon request. Inquire to ASI sales staff for additional information.
Related Products

DP 1010 Spray
Water Based Duct Sealant Spray
A premium grade, UL Listed, Low VOC, smooth, water based, UL Listed, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. DP 1010 Spray is specially formulated for application by airless sprayers...

DP 88
Spray Edge Coating
DP 88 is an aerosol spray edge coating or “duct butter” formulated to quickly and conveniently coat cut or damaged insulation.DP 88 combines the advantages of quick drying aerosol adhesives with the tack-free and flexible properties of sealants...

DP 99
Spray Degalvanizer
DP 99 is a degalvanizing spray for use on roll-forming machines, shears, punch press dies and notchers. DP 99 will soften and loosen galvanizing debris while lubricating. Daily use will keep machinery clear of galvanizing build-up. DP 99...

CONVERGENT Pentra-Clean™ (DC)
Multi-Surface, Acid-Free Daily Cleaner
Pentra-Clean™ (DC) Daily Cleaner easily removes stains, dirt, grease and grime from concrete, terrazzo, natural stone and tile floor surfaces. This product is easy to use, leaves no film or residue and has a neutral pH with no...

CONVERGENT Pentra-Shield®
Exterior Concrete Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

2590 / 2595 SPRAY GUNS
Adhesive Spray Guns
Spray guns for DP 2590 Duct Liner Adhesive and DP 2595 Closed Cell Foam Adhesive canisters.
DP 1010 Spray
Water Based Duct Sealant Spray
A premium grade, UL Listed, Low VOC, smooth, water based, UL Listed, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. DP 1010 Spray is specially formulated for application by airless sprayers...
DP 88
Spray Edge Coating
DP 88 is an aerosol spray edge coating or “duct butter” formulated to quickly and conveniently coat cut or damaged insulation.DP 88 combines the advantages of quick drying aerosol adhesives with the tack-free and flexible properties of sealants...
DP 99
Spray Degalvanizer
DP 99 is a degalvanizing spray for use on roll-forming machines, shears, punch press dies and notchers. DP 99 will soften and loosen galvanizing debris while lubricating. Daily use will keep machinery clear of galvanizing build-up. DP 99...
CONVERGENT Pentra-Clean™ (DC)
Multi-Surface, Acid-Free Daily Cleaner
Pentra-Clean™ (DC) Daily Cleaner easily removes stains, dirt, grease and grime from concrete, terrazzo, natural stone and tile floor surfaces. This product is easy to use, leaves no film or residue and has a neutral pH with no...
CONVERGENT Pentra-Shield®
Exterior Concrete Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...
2590 / 2595 SPRAY GUNS
Adhesive Spray Guns
Spray guns for DP 2590 Duct Liner Adhesive and DP 2595 Closed Cell Foam Adhesive canisters.


Get in touch to learn more
Speak to us on 800-325-7040
Contact us

















