Features
- Resists Intermittent Temperatures Up To 600°F
- Resistant to UV Degradation & Weathering
- Withstands Extreme Cold & Extreme Heat
- 25% Joint Movement Capability
- One-Component, Easy To Use Formulation
- Easy to Extrude At Cold Temperatures
- Non-Slump, Can Use On Overhead & Vertical Applications
- Excellent For Indoor & Outdoor Applications
- Creates A Waterproof Seal
Benefits
- 100% Silicone
- Color Stable
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Excellent for Indoor and Outdoor Applications
- High Temperature Resistance
- Highly Flexibile/Allows for Movement
- Long Life
- Mold and Mildew Resistant
- Non-Melting
- Non-Slump – Overhead/Vertical Applications
- Non-Yellowing
- One-Component
- Rain Ready
- RTV
- Solvent-Free
- UV Resistant/Degredation
- VOC Compliant
- Water Repellant
- Will Cure to Damp/Wet Substrates
- Withstands Extreme Temperatures
Properties
- *Intermittent temperature up to 550°F. Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. ASI 600 suggested application temperature range: -35°F to 150°F. Testing should be done to confirm temperature requirements are met. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department.
Substrates
- Glass
- Metal
- Granite
- Marble
- Most Fiberglass
- Most Wood Types
- Aluminum
- Ceramic
- Natural & Synthetic Fiber
- Most Painted Surfaces
- Some Plastics
Certifications
- ASTM C920 Class 25, Type S, Grade NS, Use NT, G, O
- TT-S-01543A
- TT-S-00230-C
- MIL-A-46106A
- FDA Regulation No. 21 CFR 177.2600
- VOC Compliant (23 grams/liter ASTM D2369)
Additional information
ADDITIONAL COMMON APPLICATIONS
- Industrial Ovens
- RV & Trailer Manufacturing
- Sealing Heating Elements
- Formed-In-Place Gasket Applications
- Industrial Manufacturing Applications
- High Temperature Gasketing Applications
- HVAC Applications
- Fireplace Manufacturing
- Appliance Manufacturing
- Sheet Metal Work & Sealing
- Encapsulating & Coating
- Temperature Sensitive Parts
- General Sealing & Bonding Applications
Available Packaging
Notes
ASI 600 is stocked in squeeze tubes, cartridges, pails and drums. Additional packaging may be available upon request. Inquire to ASI sales staff for additional information.
Related Products

ASI 57
Hybrid Polymer Sealant and Adhesive
ASI 57 Hybrid Class 50 Hybrid Sealant and Adhesive is a one-part, low odor, no-sag polyether sealant that uses ASI’s innovative hybrid technology to produce a material that is ideal for a wide range of applications where a...

ASI 5900
Fast Grab Adhesive
ASI 5900 Fast Grab Hybrid Adhesive uses ASI’s innovative hybrid technology to develop immediate green strength to fixture substrates while the adhesive cures and provides a long-term, durable bond. ASI 5900 is 100% solids.It will not shrink and...

ASI 504
Multi Purpose RTV Silicone Sealant and Adhesive
ASI 504 Multi-Purpose Silicone can be used as both a sealant and adhesive for a variety of applications requiring a waterproof seal. It Is a paste-like, one component acetoxy silicone that cures to form a durable solid rubber...

DP 1090
Low Verosity Duct Sealant
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...

DP 2510 – Black / DP 2515 – White
Fiberglass Protective Coating
A UL Classified coating for repairing and encapsulating damaged fiberglass insulation and line set protection from UV degradation. DP 2510/2515 provides a flexible, durable coating which helps to prevent fibers from entering the air stream. It may also...

ASI COMPOUND 70
Multi-Purpose Silicone Grease and Lubricant
ASI Compound 70 Multi-Purpose Silicone Grease is a moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F to 400°F.This stiff, tacky compound is non-melting and retains its properties over extended periods...
ASI 57
Hybrid Polymer Sealant and Adhesive
ASI 57 Hybrid Class 50 Hybrid Sealant and Adhesive is a one-part, low odor, no-sag polyether sealant that uses ASI’s innovative hybrid technology to produce a material that is ideal for a wide range of applications where a...
ASI 5900
Fast Grab Adhesive
ASI 5900 Fast Grab Hybrid Adhesive uses ASI’s innovative hybrid technology to develop immediate green strength to fixture substrates while the adhesive cures and provides a long-term, durable bond. ASI 5900 is 100% solids.It will not shrink and...
ASI 504
Multi Purpose RTV Silicone Sealant and Adhesive
ASI 504 Multi-Purpose Silicone can be used as both a sealant and adhesive for a variety of applications requiring a waterproof seal. It Is a paste-like, one component acetoxy silicone that cures to form a durable solid rubber...
DP 1090
Low Verosity Duct Sealant
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...
DP 2510 – Black / DP 2515 – White
Fiberglass Protective Coating
A UL Classified coating for repairing and encapsulating damaged fiberglass insulation and line set protection from UV degradation. DP 2510/2515 provides a flexible, durable coating which helps to prevent fibers from entering the air stream. It may also...
ASI COMPOUND 70
Multi-Purpose Silicone Grease and Lubricant
ASI Compound 70 Multi-Purpose Silicone Grease is a moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F to 400°F.This stiff, tacky compound is non-melting and retains its properties over extended periods...


Get in touch to learn more
Speak to us on 800-325-7040
Contact us