Related Products

EPO-TEK® OG198-55
Biocompatible UV Curing Epoxy
Shadow Curable UV Epoxy. Thixotropic version of EPO-TEK® OG198-54.

CONVERGENT Pentra-Sil® (H)
Lithium Concrete Hardener for Slabs
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...

CRACKBOND® JF
Polyurea Concrete Repair Joint Filler
This elastomeric, Polyurea joint filler (formerly known as JF-311) allows 10-15% movement of installed joint width and can be used in temperatures between -40 °F to 120 °F (-40 °C to 49 °C). Available in cartridges and in...

EPO-TEK® OG142-112-LH
UV Curable Epoxy Adhesive
Low halogen version of OG142-112, single component, low viscosity, UV curable epoxy for adhesive sealing and encapsulating fiber optic and optoelectronic packaging applications.

EPO-TEK® H20S
Silver Conductive Epoxy
100% solids silver-filled epoxy system for chip bonding in microelectronic and optoelectronic

20-2180 Series
Low Toxicity Polyurethane
Medium hardness polyurethane with excellent dielectric strength and low toxicity. Also available as faster gelling versions 20-2183 and 20-2184. Softer Shore A Hardness versions available as 20-2101, 20-2140, and 20-2160.
EPO-TEK® OG198-55
Biocompatible UV Curing Epoxy
Shadow Curable UV Epoxy. Thixotropic version of EPO-TEK® OG198-54.
CONVERGENT Pentra-Sil® (H)
Lithium Concrete Hardener for Slabs
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...
CRACKBOND® JF
Polyurea Concrete Repair Joint Filler
This elastomeric, Polyurea joint filler (formerly known as JF-311) allows 10-15% movement of installed joint width and can be used in temperatures between -40 °F to 120 °F (-40 °C to 49 °C). Available in cartridges and in...
EPO-TEK® OG142-112-LH
UV Curable Epoxy Adhesive
Low halogen version of OG142-112, single component, low viscosity, UV curable epoxy for adhesive sealing and encapsulating fiber optic and optoelectronic packaging applications.
EPO-TEK® H20S
Silver Conductive Epoxy
100% solids silver-filled epoxy system for chip bonding in microelectronic and optoelectronic
20-2180 Series
Low Toxicity Polyurethane
Medium hardness polyurethane with excellent dielectric strength and low toxicity. Also available as faster gelling versions 20-2183 and 20-2184. Softer Shore A Hardness versions available as 20-2101, 20-2140, and 20-2160.


Get in touch to learn more
Speak to us on 706-271-0466
Contact us