Downloads
Related Products
ULTRABOND® HARD-ROK
High Strength, Fast Setting Cementitious Anchoring Grout
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...
CONVERGENT Pentra-Sil® (H)
Single-Application Hardener for Slabs and Tilt-Up
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...
EPO-TEK® OG198-54
UV Curable Epoxy
Single component, low viscosity, electrically and thermally insulating shadow curable UV epoxy.
DP 1090
WATER BASED DUCT SEALANT
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...
60-7107RTR
UV Curable
Electronic grade epoxy UV adhesive, coating, and encapsulant with a CTE of 35 ppm/C.
ULTRABOND® HARD-ROK
High Strength, Fast Setting Cementitious Anchoring Grout
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...
CONVERGENT Pentra-Sil® (H)
Single-Application Hardener for Slabs and Tilt-Up
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...
EPO-TEK® OG198-54
UV Curable Epoxy
Single component, low viscosity, electrically and thermally insulating shadow curable UV epoxy.
DP 1090
WATER BASED DUCT SEALANT
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...
60-7107RTR
UV Curable
Electronic grade epoxy UV adhesive, coating, and encapsulant with a CTE of 35 ppm/C.
EP-100 SEAL
Epoxy Healer/Sealer
Low-viscosity, low surface tension, 100% solids epoxy.
Get in touch to learn more
Speak to us on 401-946-5564
Contact us