Features
- Non-sag gel for use in horizontal and vertical installation
- Cures in dry, damp, and water saturated environments
- High bond strength
- Short-term tensile anchoring and shear loading conditions in accordance with allowable stress design (ASD)
- Easy dispensing from pre-measured cartridges
- Service temperature range from -40°F to 176°F
- Rapid cure: 30 minutes (@77°F) on dry concrete
Related Products

EP-SLV
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...

ULTRABOND® HS-200
High Strength Anchoring Epoxy
With extensive DOT approvals, ULTRABOND® HS-200 is ideal for anchoring threaded rod, bolts and rebar dowels into concrete. With a long working time of 24 minutes and multiple embedment depth design tables, this anchoring epoxy offers a 2:1...

ULTRABOND® HS-1CC
High Strength Anchoring Epoxy
NSF/ANSI 61 & 372 CertifiedULTRABOND® HS-1CC is the world’s first anchoring epoxy formulated to be IBC/IRC compliant in both bulk and cartridge delivery systems. For use in dry, damp, water-filled and submerged applications, even in the most extreme...

ULTRABOND® ASF-2000
Cold Weather Doweling Adhesive
ULTRABOND® ASF-2000 is a domestically manufactured, two-component styrene free, acrylic adhesive used for anchoring and doweling applications in uncracked concrete with threaded rod and rebar. It is suitable for use in temperatures between 5 °F and 110 °F...

ULTRABOND® HARD-ROK
Concrete Strength Anchoring Adhesive
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...

ULTRABOND® HYB-2CC
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...
EP-SLV
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...
ULTRABOND® HS-200
High Strength Anchoring Epoxy
With extensive DOT approvals, ULTRABOND® HS-200 is ideal for anchoring threaded rod, bolts and rebar dowels into concrete. With a long working time of 24 minutes and multiple embedment depth design tables, this anchoring epoxy offers a 2:1...
ULTRABOND® HS-1CC
High Strength Anchoring Epoxy
NSF/ANSI 61 & 372 CertifiedULTRABOND® HS-1CC is the world’s first anchoring epoxy formulated to be IBC/IRC compliant in both bulk and cartridge delivery systems. For use in dry, damp, water-filled and submerged applications, even in the most extreme...
ULTRABOND® ASF-2000
Cold Weather Doweling Adhesive
ULTRABOND® ASF-2000 is a domestically manufactured, two-component styrene free, acrylic adhesive used for anchoring and doweling applications in uncracked concrete with threaded rod and rebar. It is suitable for use in temperatures between 5 °F and 110 °F...
ULTRABOND® HARD-ROK
Concrete Strength Anchoring Adhesive
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...
ULTRABOND® HYB-2CC
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...


Get in touch to learn more
Speak to us on 505-217-2121
Contact us