Features
- Excellent Unprimed Adhesion
- Resistant To UV Degradation & Weathering
- Low Viscosity, Self-Leveling
- One-Component, Moisture Curing
- Non-Corrosive Formulation
- Ideal For Encapsulating, Sealing & Coating
- Does Not Contain Solvent or Acetic Acid
Benefits
- 100% Silicone
- Chemical Resistant
- Color Stable
- Compatible with Electronics
- Easy to Dispense at Variety of Temperatures
- Excellent Adhesion
- Highly Flexibile/Allows for Movement
- Long Life
- Low Odor
- Low Viscosity/Self-Leveling
- Moisture Curing
- Non-Corrosive
- One-Component
- Rain Ready
- RTV
- Self-Leveling
- Solvent-Free
- UV Resistant/Degredation
- VOC Compliant
- Water Repellant
- Weather Resistant
- Will Not Crack
Properties
- *Intermittent temperature up to 450°F. Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. ASI 306 suggested application temperature range: -30°F to 150°F. Testing should be done to confirm temperature requirements are met. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department.
Substrates
- Glass
- Marble
- Granite
- Metal
- Ceramic
- Most Painted Surfaces
- Natural & Synthetic Fiber
- Most Fiberglass
- Some Plastics
- Most Wood Types
- Aluminum
Certifications
- VOC Compliant (23 grams/liter ASTM D2369)
- Meets the requirements of MIL 46106B Type 2
Additional information
ADDITIONAL COMMON APPLICATIONS
- Encapsulating Electronics
- Thin Section Electronics
- Coating
- Horizontal Joint & Gap Filling
Available Packaging
Notes
ASI 306 is stocked in cartridges, pails and drums. Additional packaging may be available upon request. Inquire to ASI sales staff for additional information.
Related Products

ASI 57
Hybrid Polymer Sealant and Adhesive
ASI 57 Hybrid Class 50 Hybrid Sealant and Adhesive is a one-part, low odor, no-sag polyether sealant that uses ASI’s innovative hybrid technology to produce a material that is ideal for a wide range of applications where a...

CONVERGENT Pentra-Guard® (EXT)
Clear Coat Concrete Sealer
Pentra-Guard® (EXT) is an eco-friendly, exterior stone sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing the natural color and shine. This treatment creates a breathable, protective...

CONVERGENT Pentra-Sil® (C&N)
pH Neutralizing Densifier and Hardener
Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate.

20-1625
Silicone Potting System
Optically clear, low viscosity, 1:1 silicone potting system. Ideal for protection from shock and vibration.

50-3152FR
Thermally Conductive Potting Epoxy
Potting and encapsulating UL 94 V-0 listed epoxy with a CTI > 600 Volts. UL File Number E235584.

CONVERGENT Pentra-Sil® (H)
Lithium Concrete Hardener for Slabs
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...
ASI 57
Hybrid Polymer Sealant and Adhesive
ASI 57 Hybrid Class 50 Hybrid Sealant and Adhesive is a one-part, low odor, no-sag polyether sealant that uses ASI’s innovative hybrid technology to produce a material that is ideal for a wide range of applications where a...
CONVERGENT Pentra-Guard® (EXT)
Clear Coat Concrete Sealer
Pentra-Guard® (EXT) is an eco-friendly, exterior stone sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing the natural color and shine. This treatment creates a breathable, protective...
CONVERGENT Pentra-Sil® (C&N)
pH Neutralizing Densifier and Hardener
Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate.
20-1625
Silicone Potting System
Optically clear, low viscosity, 1:1 silicone potting system. Ideal for protection from shock and vibration.
50-3152FR
Thermally Conductive Potting Epoxy
Potting and encapsulating UL 94 V-0 listed epoxy with a CTI > 600 Volts. UL File Number E235584.
CONVERGENT Pentra-Sil® (H)
Lithium Concrete Hardener for Slabs
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...


Get in touch to learn more
Speak to us on 800-325-7040
Contact us