ASI 505 - Industrial Grade Silicone Self Leveling

505 Industrial Grade Self Leveling Silicone Web 1368x874

ASI 505 Self-Leveling RTV Silicone is a one-component, moisture cure, flowable material designed for a variety of potting, coating, sealing and waterproofing applications.

Once applied, ASI 505 will begin skinning in 8 minutes and continue curing to form a flexible, durable rubber that bonds well to a wide variety of substrates. ASI 505 will resist a wide temperature range (-70°F to 400°F) and will not degrade when used in exterior applications or under water. It is extremely UV resistant and will not shrink, crack or dry out long-term. ASI 505 Contains no solvents and is VOC compliant.

SDS TDS
Brand:
American Sealants inc.
Technology:
Acetoxy Silicone
Application:
Building Envelope and Components Consumer Electronics and PCBA
Market:
Building Construction Electronics
Function:
Above Water Marine Bonding Corrosion Protection Encapsulation Glazing High Temperature Potting Sealing Thermal Transfer Waterproofing

Available Packaging

Notes

ASI 505 is stocked in cartridges, pails and drums. Additional packaging may be available upon request. Inquire to ASI sales staff for additional information.

Related Products

Viewing options:
ASI COMPOUND 70

ASI COMPOUND 70

Multi-Purpose Silicone Grease and Lubricant

ASI Compound 70 Multi-Purpose Silicone Grease is a moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F to 400°F.This stiff, tacky compound is non-melting and retains its properties over extended periods...

SDS
TDS
View product
EPO-TEK® 930-4

EPO-TEK® 930-4

Thermally Conductive Epoxy Adhesive

Two component, thermally conductive epoxy, formulated with a very fine boron-nitride filler particle. Also available in a single component frozen syringe. 

SDS
TDS
View product
EPX50-SC

EPX50-SC

Low-Modulus, Epoxy Urethane Co-Polymer

EPX50‑SC (Standard Cure) is a moisture‑insensitive, low‑modulus epoxy urethane co‑polymer engineered to deliver dependable performance in demanding concrete preservation environments. Applied as a 1/4" to 3/8" single‑ or dual‑layer system, it forms a durable, chemical‑resistant, and waterproof protective...

SDS TDS
View product
CONVERGENT SlabArmor™ Seal&Shine Finish

CONVERGENT SlabArmor™ Seal&Shine Finish

High-Performance, High-Gloss Concrete Finisher and Sealer

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

SDS TDS
View product
CONVERGENT Pentra-Sil® (AC)

CONVERGENT Pentra-Sil® (AC)

Treatment for Sweating Slabs and Efflorescence

Pentra-Sil® (AC) is an advanced alkalinity control treatment when used after Pentra-Sil® (C&N) reacts with concrete to lower pH levels. Through this permanent reaction, slab sweating and efflorescence can be significantly reduced or eliminated. The lithium silicate in...

SDS TDS
View product
50-3112

50-3112

Fast Curing Epoxy Adhesive

Fast curing epoxy adhesive with high lap shear strength available in the convenient TriggerBond® packaging.

SDS
TDS
View product

Get in touch to learn more

Speak to us on 800-325-7040

Contact us