Features
- Ultra-fast 30 minute full cure time at 75 °F (24 °C) in dry concrete
- Cures down to 5 °F (-15 °C) – see Table 5
- Fast mortar repair for panels and other concrete surfaces
- High bond strength with fast cure times
- Easily dispensable even at low temperatures
- Made in the USA
- Styrene free
- Non-sag
- Low odor
Properties
- Can be installed down to 5 °F (-9 °C)
- Moisture insensitive
- Meets the following designations per ASTM C881/AASHTO M235: Grade 3 | Class A | Type I, II, IV, V Grade 3 | Class B | Type I, II, IV, V Grade 3 | Class C | Type I, II, IV, V
- Non-sag consistency
- 18 month shelf life
Downloads
Certifications
Available Packaging


Related Products

ULTRABOND® 1
Concrete Anchor Epoxy
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....

ASF-GEL
Epoxy Gel Acrylic Adhesive
ASF-GEL is a two-component, styrene-free, epoxy acrylate adhesive gel with an extended installation range from 15°F to 95°F.

EP-GEL FAST
Non-sag, high-modulus, high-strength doweling gel
EP-GEL FAST is a two-component, 100% solids, high-modulus epoxy gel adhesive that offers exceptional strength in doweling and anchoring applications.

ULTRABOND® HARD-ROK
Concrete Strength Anchoring Adhesive
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...

ULTRABOND® HYB-2CC
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...

ULTRABOND® 2
Ultrabond Epoxy
With slower curing for the warmest southern climates, ULTRABOND® 2 provides a long working time of 28 minutes @ 75°F (24°C) and in-service temperatures to 180°F. For anchoring threaded rod into concrete, ULTRABOND® 2 has a 1:1 mix...
ULTRABOND® 1
Concrete Anchor Epoxy
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....
ASF-GEL
Epoxy Gel Acrylic Adhesive
ASF-GEL is a two-component, styrene-free, epoxy acrylate adhesive gel with an extended installation range from 15°F to 95°F.
EP-GEL FAST
Non-sag, high-modulus, high-strength doweling gel
EP-GEL FAST is a two-component, 100% solids, high-modulus epoxy gel adhesive that offers exceptional strength in doweling and anchoring applications.
ULTRABOND® HARD-ROK
Concrete Strength Anchoring Adhesive
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...
ULTRABOND® HYB-2CC
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...


Get in touch to learn more
Speak to us on 800-892-1880
Contact us