Features
Properties
Downloads
Certifications
Available Packaging
Notes
*Must order 1 each of component A and B
Related Products

Get in touch to learn more
Speak to us on 800-892-1880
Contact us此网站透过 Google 翻译来提供内容翻译,有时翻译未必准确。
This site uses Google Translate to provide translation and may not always be accurate.
Vertalingen van deze website worden vertaald met Google Translate en zijn mogelijk niet altijd accuraat.
Ce site se sert de Google Traduction pour traduire son contenu et peut parfois présenter des erreurs.
Ce site utilise Google Translate pour fournir des traductions qui peuvent ne pas toujours être exactes.
Diese Website verwendet Google Translate, um Übersetzungen bereitzustellen, deren Genauigkeit und Zuverlässigkeit jedoch nicht garantiert werden kann.
Questo sito utilizza Google Translate per tradurre e non è garantito che il risultato sia sempre accurato.
本サイトが提供する翻訳文はGoogle翻訳を利用しており、必ずしも正確な翻訳であるとは限りません。
이 사이트는 Google 번역을 사용하여 번역을 제공하고 있으며 그 내용이 정확하지 않을 수 있습니다
Este sitio utiliza Google Translate para ofrecer traducciones y puede que no siempre sea preciso.
Rapid curing, polyurea control joint filler designed for heavy duty traffic and freezer applications. Low viscosity, self leveling and allows for 10-15% movement of installed joint width. Available in cartridges and bulk.
*Must order 1 each of component A and B
Semi-Rigid Epoxy Control Joint Filler
CRACKBOND® JF-90 HD is a two component, moisture insensitive heavy duty epoxy joint filler and crack filling material. Its semi-rigid design allows for use in industrial floors exposed to hard-wheeled forklift traffic. It shaves easily and may be...
Multi-Purpose Hybrid Sealant & Adhesive
ASI 55 Industrial & Construction Hybrid Sealant/Adhesive uses ASI’s innovative hybrid technology to provide a one part, elastomeric sealant/adhesive that will perform in a variety of demanding environments and applications without degrading.Unlike conventional polyurethanes and solvent based sealants/...
High Performance Hybrid Sealant & Adhesive
ASI 57 Hybrid Class 50 Hybrid Sealant and Adhesive is a one-part, low odor, no-sag polyether sealant that uses ASI’s innovative hybrid technology to produce a material that is ideal for a wide range of applications where a...
Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks
This elastomeric, Polyurea joint filler (formerly known as JF-311) allows 10-15% movement of installed joint width and can be used in temperatures between -40 °F to 120 °F (-40 °C to 49 °C). Available in cartridges and in...
pH Neutralizing Densifier and Hardener
Pentra-Sil® (AC) is an advanced alkalinity control treatment that reacts with concrete to neutralize its pH levels. Through this permanent reaction, slab sweating and efflorescence is significantly reduced. The lithium silicate in this product also densifies and hardens...
LR-321 Formulas Offer Versatility for Various Crack Injection Applications
LR-321 crack injection epoxies offer versatility for various high performance structural applications. LR-321 LV (formerly known as LR-321) is a low viscosity epoxy for cracks that range from 1/8 in. to < 1/4 in. LR-321 SLV is a...
Semi-Rigid Epoxy Control Joint Filler
CRACKBOND® JF-90 HD is a two component, moisture insensitive heavy duty epoxy joint filler and crack filling material. Its semi-rigid design allows for use in industrial floors exposed to hard-wheeled forklift traffic. It shaves easily and may be...
Multi-Purpose Hybrid Sealant & Adhesive
ASI 55 Industrial & Construction Hybrid Sealant/Adhesive uses ASI’s innovative hybrid technology to provide a one part, elastomeric sealant/adhesive that will perform in a variety of demanding environments and applications without degrading.Unlike conventional polyurethanes and solvent based sealants/...
High Performance Hybrid Sealant & Adhesive
ASI 57 Hybrid Class 50 Hybrid Sealant and Adhesive is a one-part, low odor, no-sag polyether sealant that uses ASI’s innovative hybrid technology to produce a material that is ideal for a wide range of applications where a...
Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks
This elastomeric, Polyurea joint filler (formerly known as JF-311) allows 10-15% movement of installed joint width and can be used in temperatures between -40 °F to 120 °F (-40 °C to 49 °C). Available in cartridges and in...
pH Neutralizing Densifier and Hardener
Pentra-Sil® (AC) is an advanced alkalinity control treatment that reacts with concrete to neutralize its pH levels. Through this permanent reaction, slab sweating and efflorescence is significantly reduced. The lithium silicate in this product also densifies and hardens...
LR-321 Formulas Offer Versatility for Various Crack Injection Applications
LR-321 crack injection epoxies offer versatility for various high performance structural applications. LR-321 LV (formerly known as LR-321) is a low viscosity epoxy for cracks that range from 1/8 in. to < 1/4 in. LR-321 SLV is a...
Speak to us on 800-892-1880
Contact us