EP-PATCH

Features

High impact resistance, high early strength
Low modulus
Open to traffic in 3.5 hours (@75°F)
High oil and chemical resistance
Non-shrink, excellent workability
Chemically bonds to concrete
Pre-measured units
Withstands freeze thaw cycles
Easy soap and water clean up
Excellent choice for spalls and deteriorated joint edges

Applications

High-stress applications such as bridge decks, airport runways, loading docks, warehouse floors and other concrete repair applications
Patching concrete prior to installing epoxy polymer overlays and other top coatings

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name EP-PATCH 7040 SDS Part A

File Size 357.9 KB

View

Safety Data Sheet

Document Name EP-PATCH 7040 SDS Part B

File Size 413.9 KB

View

Safety Data Sheet

Document Name EP-PATCH SDS Part C

File Size 263.1 KB

View

Technical Data Sheet

Document Name EP-PATCH 7040 TDS

File Size 59.0 KB

View

Technical Data Sheet

Document Name Engineered Aggregate Extender TDS

File Size 139.4 KB

View

Miscellaneous

Document Name EP-PATCH Physical Properties

File Size 60.9 KB

View

Brand:

E-Chem

Technology:

Epoxy

Application:

Bridge, Roadway Safety, and Preservation

Market:

Infrastructure

Available Packaging

Notes

Related Products

Viewing options:

Higher-performance, low-modulus, epoxy patching mortar

EP-PATCH is a three-component, high-performance, 100% solids, multi-purpose, non-shrink epoxy patching mortar. It is characterized by high early strength, low modulus, excellent workability and excellent bond strength. The system combines a high-quality epoxy resin and curing agent with an engineered blend of graded...

EPC-OVERLAY

Epoxy Polymer Concrete Overlay

EPC-OVERLAY is an all-in-one, 100% solids, solvent-free, moisture-insensitive, high-performance, multi-purpose epoxy polymer concrete overlay system. This next generation system is easy-to-use and cost-effective, combining a low-modulus epoxy resin system with a high-quality engineered blend of graded aggregate to...

TDS

TRANSIL® SXT

Concrete Surface Sealer, Hardener and Densifier

Transil® SXT is a clear, penetrating, breathable, surface-applied liquid treatment which strengthens, protects and hardens concrete pavements extending the service life up to 35%. The high performance treatment maximizes durability and longevity of tined, diamond ground, grooved, milled, shot-blasted, and/or re-textured surfaces...

SDS TDS

EP75-SEAL

Penetrating Healer and Urethane Sealer

EP75-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.

TDS

HFP 1:1

Advanced Surface Polymer

HFP 1:1 is a moisture-insensitive, low-modulus, two component, high friction surface polymer designed for binding high friction surfacing aggregates to asphalt, concrete on grade and elevated surfaces.

TDS

EPX50-OVERLAY FAST

Rapid Set Epoxy Urethane

EPX50-OVERLAY FAST is a fast-setting, moisture-insensitive, low-modulus, two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as a binder...

TDS

Get in touch to learn more

Speak to us on 505-217-2121

EP-PATCH 7040 - High-performance, low-modulus, epoxy patching mortar

Features

Applications

Downloads