EP50-OVERLAY
Low Modulus Polymer Resin Overlay
EP50-OVERLAY is a solvent-free, moisture-insensitive, 100% solids, low-modulus, two-component polymer designed primarily for bonding skid-resistant overlays.
EP75-SEAL
Penetrating Healer and Urethane Sealer
EP75-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.
EPX50-OVERLAY
Moisture Insensitive Epoxy Polymer Overlay
EPX50-OVERLAY is a moisture-insensitive, low-modulus, 3/8” two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as...
EPX50-OVERLAY FAST
Rapid Set Epoxy Urethane
EPX50-OVERLAY FAST is a fast-setting, moisture-insensitive, low-modulus, two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as a binder...
EPX50-SC
Low-Modulus, Epoxy Urethane Co-Polymer
EPX50‑SC (Standard Cure) is a moisture‑insensitive, low‑modulus epoxy urethane co‑polymer engineered to deliver dependable performance in demanding concrete preservation environments. Applied as a 1/4" to 3/8" single‑ or dual‑layer system, it forms a durable, chemical‑resistant, and waterproof protective...
EPX50LT-OVERLAY
Epoxy Urethane Polymer Resin
EPX50LT-OVERLAY is a moisture-insensitive, low-modulus, epoxy urethane co-polymer overlay resin, designed to be applied in late season cold conditions down to 30 °F and rapid return to service applications.
HFP 1:1
Advanced Surface Polymer
HFP 1:1 is a moisture-insensitive, low-modulus, two component, high friction surface polymer designed for binding high friction surfacing aggregates to asphalt, concrete on grade and elevated surfaces.
PILE ANCHOR GROUT
Fast-strength, fast-setting epoxy anchoring grout
PILE ANCHOR GROUT is a two-component, 100% solids, high strength, pourable epoxy anchoring grout.
TRANSIL® 244(+)
Densifying Waterproofer and Chloride Ion Barrier
Transil® 244(+) is a premium Nano-Lithium® hardener, densifier, and hydrophobic sealer ideal for protecting concrete and masonry surfaces against damage from freeze-thaw cycles, moisture, and chloride ion intrusion.
