Features
- Ideal for Commercial, Industrial & Construction
- Mold & Mildew Resistant When Cured
- Non-Sag, Use On Vertical Or Overhead Joints
- Resistant To UV Degradation & Weathering
- Bonds To Most Common Building Materials
- Easy To Use, Water Clean Up
- Paintable
- Good Adhesion
- Cures To Form A Strong & Flexible Waterproof Seal
Benefits
- Broad Adhesion Range/Bonds to Common Substrates
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Long Life
- Moisture Curing
- Mold and Mildew Resistant
- Non-Slump – Overhead/Vertical Applications
- Non-Yellowing
- One-Component
- Paintable
- Solvent-Free
- VOC Compliant
- Water Repellant
- Weather Resistant
- Will Not Crack
Properties
- Paintable with latex paints 2 hrs. after application. Paintable with oil based paints 24 hrs. after application.
- Clear applies white and will turn clear within approximately 2 weeks at normal curing conditions. Cooler temperatures & higher humidity will prolong drying.
- *Intermittent temperature up to 230°F. Testing should be done to confirm temperature requirements are met. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department.
Substrates
- Ceramics
- Glass
- Granite
- Some Metals
- Most Woods
- Some Plastics
- Marble
- Porcelain
Downloads
Certifications
- Clear: ASTM C834-05 Type C
- Clear: VOC Compliant
- White: ASTM C920, Class 12.5
- White: TT-S-00230C Class B
- White: VOC Compliant
Additional information
ADDITIONAL COMMON APPLICATIONS
- Bathroom Installation/Sealing
- Window & Door Interior Sealing
- Countertops
- Trim work
- Tub & Tile
- Cabinets
- General Sealing & General Construction
- Portable Housing Interior Applications
- Applications Where Painting is Required
Available Packaging
Notes
ASI 174 Siliconized Acrylic Latex is stocked in 10 oz. caulking cartridges. Additional packaging may be available upon request.
Related Products

DP 3030
Water Based Vapor Retarder
A water-based, premium quality, low odor, quick drying, water resistant, vapor retarder mastic for commercial and residential use. DP 3030 is bright white and is formulated to have excellent brush and trowel application properties. DP 3030 is recommended...

CONVERGENT Pentra-Sil® (IH)
Polished Concrete Densifier and Hardener
Pentra-Sil® (IH) was designed to give concrete polishers an easy-to-use densifier that greatly improves the final finish of polished concrete by dramatically hardening the substrate and allowing abrasive tooling to work more efficiently and effectively. The Pentra-Sil® (IH)...

CONVERGENT Pentra-Sil® (HD)
The Original Lithium-Silicate Densifier
With over 25 years of proven performance, Pentra-Sil® (HD) is the original, patented lithium-silicate densifier and hardener. This high-solids, premium densifier provides maximum hardening and dustproofing for new or existing concrete slabs. Pentra-Sil® (HD) penetrates and reacts deep...

CONVERGENT Pentra-Sil® (C&N)
Concrete Cleaner and Neutralizer
Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This first step of a two-part treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate.

DP 240 / DP 340
Foil Mastic Tape Duct Sealant
A foil backed butyl mastic rolled sealant tape that is fully cured, high pressure/high velocity rated for use on commercial and residential supply and return air ducts. DP Foil Mastic Tape is pressure sensitive and requires no cure...

DP 2540 – Black / DP 2545 – White
Protective Coating for Fiberglass
A water based protective coating formulated with an EPA Registered preservative that prevents the growth of mold, mildew, and fungus on the surface of the coating. It is recommended as an encapsulant on worn or damaged fiberglass to...
DP 3030
Water Based Vapor Retarder
A water-based, premium quality, low odor, quick drying, water resistant, vapor retarder mastic for commercial and residential use. DP 3030 is bright white and is formulated to have excellent brush and trowel application properties. DP 3030 is recommended...
CONVERGENT Pentra-Sil® (IH)
Polished Concrete Densifier and Hardener
Pentra-Sil® (IH) was designed to give concrete polishers an easy-to-use densifier that greatly improves the final finish of polished concrete by dramatically hardening the substrate and allowing abrasive tooling to work more efficiently and effectively. The Pentra-Sil® (IH)...
CONVERGENT Pentra-Sil® (HD)
The Original Lithium-Silicate Densifier
With over 25 years of proven performance, Pentra-Sil® (HD) is the original, patented lithium-silicate densifier and hardener. This high-solids, premium densifier provides maximum hardening and dustproofing for new or existing concrete slabs. Pentra-Sil® (HD) penetrates and reacts deep...
CONVERGENT Pentra-Sil® (C&N)
Concrete Cleaner and Neutralizer
Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This first step of a two-part treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate.
DP 240 / DP 340
Foil Mastic Tape Duct Sealant
A foil backed butyl mastic rolled sealant tape that is fully cured, high pressure/high velocity rated for use on commercial and residential supply and return air ducts. DP Foil Mastic Tape is pressure sensitive and requires no cure...
DP 2540 – Black / DP 2545 – White
Protective Coating for Fiberglass
A water based protective coating formulated with an EPA Registered preservative that prevents the growth of mold, mildew, and fungus on the surface of the coating. It is recommended as an encapsulant on worn or damaged fiberglass to...


Get in touch to learn more
Speak to us on 800-325-7040
Contact us



















