Features
- 50% Joint Movement
- Extremely Flexible
- 100% Solids, Will Not Shrink
- Contains No Solvents Or Asocyanates (VOC Compliant)
- Low Odor, Eco-Friendly
- Resistant To UV Degradation & Weathering
- Easy To Dispense & Tool At A Variety Of Temperatures
- Will Cure When Water Or Moisture is Present
- Cures To Wet Substrates Without Negative Effects
- 25% Joint Movement Capability
- Excellent Adhesion Range
- Non-Slump, Can Use On Overhead & Vertical Applications
- Will Not Wash Off With Rain Or Moisture
- Paintable Within 24 Hours
Benefits
- 100% Silicone
- 100% Solids/Will Not Shrink
- Advanced/High Joint Movement
- Broad Adhesion Range/Bonds to Common Substrates
- Chemical Resistant
- Color Stable
- Compatible with Electronics
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Electrically and Thermally Conductive
- Excellent Adhesion
- Excellent for Encapsulating/Sealing/Coating
- Excellent for Indoor and Outdoor Applications
- Excellent Long Term Physical Properties
- Highly Flexibile/Allows for Movement
- Long Life
- Low Odor
- Low Temperature Resistance
- Medium Viscosity
- MEKO-Free
- Mold and Mildew Resistant
- Non-Corrosive
- Non-Slump – Overhead/Vertical Applications
- Non-Yellowing
- Odorless
- One-Component
- Paintable
- Rain Ready
- Soft and Flexible
- Solvent-Free
- Thermally and Electrically Insulating
- Thermally Conductive Electrically Insulating
- Thick Viscosity (paste)
- UV Resistant/Degredation
- VOC Compliant
- Water Repellant
- Weather Resistant
- Will Cure to Damp/Wet Substrates
- Will Not Crack
Properties
- Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. ASI 57 suggested application temperature range: 32°F to 150°F. ASI 57 can be applied lower than 32°F. However, it will slow down curing. In general lower temperature & humidity will slow skin and cure times. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer’s sales and technical service department.
Substrates
- Glass
- Ceramic
- Fiberglass
- Wood
- EPDM
- Porcelain
- PVC & Other Plastics
- Aluminum & Galvanized Metal
- Kynar® Coated Substrates
- Marble & Granite
- Concrete, Brick, Mortar (Porous Substances)
- EPS or Styrofoam Insulation
Certifications
- ASTM C920, Type S, Grade NS, Class 25, Uses NT, T, M, G, A & O
- Conforms to California Proposition 65
- Meets USDA Requirements for Non-Food Contact
- Meets Requirements of CARB & SCAQMD
- ASTM E84, Class A, Flame Spread: 0, Smoke Developed: 0
- VOC Compliant
Additional information
ADDITIONAL COMMON APPLICATIONS
- Joint Sealant Applications
- Trailer & RV Manufacturing
- Walk-In Freezer Manufacturing & Installation
- General Construction
- Industrial Manufacturing
- Solar Panel Installation
- Adhesive Applications
- Roofing
- Pre-cast Concrete
- Window & Door Installation
- Weather Sealing
- HVAC Applications
- Appliance Manufacturing
- Masonry Applications
Available Packaging
Notes
ASI 57 is available in 10 oz. caulking cartridges, pails and drums. Additional packaging options may be available. Inquire to ASI sales staff for additional information.
Related Products
DP DUCT WRAP FILM
DP Wrap is a polyethylene film with a high-tack adhesive designed to provide protection from moisture, dust, debris, and paint. The film is easily removed, tear resistant and UV resistant.Covering round and rectangular duct during transportation, storage and...
CONVERGENT Pentra-Sil® (C&N)
pH Neutralizing Densifier and Hardener
Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate.
PILE ANCHOR GROUT
Epoxy Anchoring Grout
Fast-strength, fast-setting epoxy anchoring grout.
CONVERGENT Pentra-Shield®
Hardener, Densifier & Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...
DP 3060
LOW VISCOSITY WATER BASED LAGGING ADHESIVE
A low viscosity, premium quality, UL Classified, Low VOC, water based, quick drying, low odor lagging adhesive and protective coating for indoor use. The lower viscosity of DP 3060 makes it an ideal lap adhesive for pipe insulation...
DP DUCT WRAP FILM
DP Wrap is a polyethylene film with a high-tack adhesive designed to provide protection from moisture, dust, debris, and paint. The film is easily removed, tear resistant and UV resistant.Covering round and rectangular duct during transportation, storage and...
CONVERGENT Pentra-Sil® (C&N)
pH Neutralizing Densifier and Hardener
Pentra-Sil® (C&N) cleans and neutralizes concrete floors that suffer from surface sweating and efflorescence. This treatment stabilizes the alkalinity in concrete surfaces by infusing lithium ions throughout the substrate.
PILE ANCHOR GROUT
Epoxy Anchoring Grout
Fast-strength, fast-setting epoxy anchoring grout.
CONVERGENT Pentra-Shield®
Hardener, Densifier & Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...
DP 3060
LOW VISCOSITY WATER BASED LAGGING ADHESIVE
A low viscosity, premium quality, UL Classified, Low VOC, water based, quick drying, low odor lagging adhesive and protective coating for indoor use. The lower viscosity of DP 3060 makes it an ideal lap adhesive for pipe insulation...
Get in touch to learn more
Speak to us on 800-325-7040
Contact us