Concrete Densifier, Sealer & Hardener

Features

High solids formula improves polishing results
Enhances and protects dyed, stained and integrally colored concrete
Uses patented Nano-Lithium® technology
Hardens, densifies, and dust-proofs
Easy-to-use, no rinsing required
Defends against water, stains, and harmful substances
Breathable: allows interior moisture to escape without damaging sealer
Penetrates: no film to lift or peel off
Protects against salt and freeze-thaw damage
Reduces efflorescence and surface sweating
Does not contribute to surface ASR or promote crazing
VOC compliant, may contribute to LEED points (IEQ credit)

Properties

Application method

Sprayer

Color

Red tint, dries clear

Coverage rate

600-800 ft² per gallon (14.7-19.6 m² per liter)

Film-forming

Form

Liquid

Freeze point

32 ºF (0 ºC)

Odor

Slight to none

11-12

Shelf life

1 year in unopened, sealed container

Specific gravity

1.1

Total solids

17.1%

VOC content

<50g/L

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name Pentra-Sil® (HDS) SDS

File Size 201.7 KB

View

Technical Data Sheet

Document Name Pentra-Sil® (HDS) TDS

File Size 624.3 KB

View

Brand:

Adhesives Technology

Technology:

Lithium, Colloidal & Strontium

Application:

Building Envelope and Components

Market:

Building Construction Infrastructure

Available Packaging

Size

Part Number

Quantity

Picture

Size 1 Gallon Jug

Part Number CCR-060-1

Quantity 126

Picture

Size 5 Gallon Pail

Part Number CCR-060-5

Quantity 35

Picture

Size 55 Gallon Drum

Part Number CCR-060-55

Quantity 4

Picture

Size 275 Gallon Tote

Part Number CCR-060-275

Quantity 1

Picture

Related Products

Viewing options:

CONVERGENT SlabArmor™ Seal&Shine Finish

High-Performance, High-Gloss Concrete Finisher and Sealer

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

SDS TDS

CONVERGENT STRiON:FORTIFY

Revolutionary spray-on, silica-free densifier

STRiON:Fortify is a revolutionary new method of concrete densification and hardening. Using groundbreaking new silica-free technology, STRiON relies on an ionic transfer process to disperse deep into concrete to make it more resilient, resistant to traffic, dustproof, easy...

SDS TDS

CONVERGENT Pentra-Sil® (IH)

Improves gloss and clarity in polishing terrazzo, stone and concrete

Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...

SDS TDS

CONVERGENT Pentra-Shield®

Hardener, Densifier & Sealer

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

SDS TDS

CONVERGENT Pentra-Sil® (H)

Single-Application Hardener for Slabs and Tilt-Up

Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...

SDS TDS

CONVERGENT Pentra-Sil® (HL)

Hybrid lithium densifier and hardener

Pentra-Sil® (HL) is a high-solids blended hybrid lithium densifier designed for concrete densifying and hardening in newly placed or existing slabs. Its reactive formulation fills the micro-pores of the concrete, strengthening the surface and prolonging its life. Pentra-Sil®...

SDS TDS