Pentra-Sil® (HL) | Hybrid Lithium Densifier and Hardener

Features

Protects against salt and freeze/thaw damage
Hardens, densifies and dust-proofs
Easy-to-use, low odor, no rinsing required
Defense against water and harmful substances
Not susceptible to UV damage
Breathable–allows moisture to escape without damage to the surface
Penetrates–no film to lift or peel off
Reduces efflorescence and surface sweating
Does not contribute to surface ASR or promote crazing
VOC compliant, may contribute to LEED points (IEQ credit)

Properties

Application method

Sprayer

Color

Clear

Coverage rate

300-400 ft² per gallon (7.4-9.8 m² per liter)

Form

Liquid

Freeze point

32ºF (0ºC)

Odor

None

11.2

Shelf life

1 year in unopened, sealed container

Specific gravity

1.10

Total solids

14.5-15.5%

VOC content

<50g/L

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name Pentra-Sil® (HL) SDS

File Size 251.5 KB

View

Technical Data Sheet

Document Name Pentra-Sil® (HL) TDS

File Size 1.0 MB

View

Brand:

Adhesives Technology

Technology:

Lithium, Colloidal & Strontium

Application:

Building Envelope and Components

Market:

Building Construction Infrastructure

Available Packaging

Size

Part Number

Quantity

Picture

Size 1 Gallon Jug

Part Number CCT-152-1

Quantity 126

Picture

Size 5 Gallon Pail

Part Number CCT-152-5

Quantity 35

Picture

Size 55 Gallon Drum

Part Number CCT-152-55

Quantity 4

Picture

Size 275 Gallon Tote

Part Number CCT-152-275

Quantity 1

Picture

Related Products

Viewing options:

CONVERGENT SlabArmor™ Starter

Colloidal Silica Concrete Curing/Finishing Aid and Hardener

SlabArmor™ Starter is a colloidal silica concrete curing/finishing aid and hardener used in the placement and finishing of new concrete. Its hydrophilic property holds bleed water in the capillaries of the concrete slab during the curing process, reducing...

SDS TDS

CONVERGENT Pentra-Sil® (HD)

Water-based lithium densifier for maximum hardening

Pentra-Sil® (HD) is a high-performance lithium densifier that provides optimal hardening to improve abrasion and stain resistance and reduce dusting. Easy to use. Provides easier maintenance and longer concrete life. Pentra-Sil® (HD) is best for existing concrete surfaces...

SDS TDS

CONVERGENT Pentra-Shield®

Hardener, Densifier & Sealer

Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...

SDS TDS

CONVERGENT SlabArmor™ Seal&Shine Finish

High-Performance, High-Gloss Concrete Finisher and Sealer

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

SDS TDS

CONVERGENT Pentra-Sil® (244+)

VOC Compliant Lithium Hardener, Densifier & Sealer

Pentra-Sil® (244+) is a high-performance lithium hardener, densifier and sealer. It is formulated to protect existing concrete against damage from salt, freeze-thaw, moisture and steel corrosion. Pentra-Sil® (244+) reduces chloride ion intrusion, dustproofs, hardens and fortifies the surface....

SDS TDS

CONVERGENT Pentra-Sil® (H)

Single-Application Hardener for Slabs and Tilt-Up

Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...

SDS TDS