DP 1090 Sealant | Low VOC HVAC Duct Sealant

Features

LEED V4 Qualified
UL Classified
Low VOC
Meets Requirements of NFPA 90A & 90B, ASTM E-84, and UL-723
Meets CDPH Emission Requirements
California Compliant
Excellent Water and U.V. Resistance
Excellent Workability
Crack and Peel Resistant
Mold and Mildew Resistant
Indoor and Outdoor Usage
Minimal Shrinkage
Sag Resistant
PVS/PVC Steel Application

Properties

Color

Tan

Base

Solvent

Chemical Family

Synthetic Elastomeric

Solids Content

68 ± 2%

Viscosity

Approx. 120,000 - 180,000 cps

Application Temperature

0°F to 110°F

Storage

Do not store where temperature exceeds 110°F or falls below 0°F. Optimum storage temperature at 60o F - 80o F

Freeze/Thaw Stability

5 cycles no deterioration (DPTM-20)

Service Temperature

-20°F to 190°F

Flammability

Extremely flammable

Flash Point

Closed cup: -0.4°F (-18°C)

Shelf Life

9 Months (unopened containers)

Cure Time

24-72 hours depending on temperature, humidity, and application

Coverage

Dependent on application thickness, 80-100 sq. ft. at approximately 20 wet mils

Clean Up

Mineral spirits or acetone

Packaging

10 ounce tubes, 1 gallon pails

Pressure Classes

Meets all SMACNA pressure classes

Seal Classes

Meets all SMACNA seal classes

VOC

44 g/l

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name DP-1090-SDS

File Size 214.9 KB

View

Technical Data Sheet

Document Name DP 1090 TDS

File Size 795.0 KB

View

Certifications

Additional information

Brand:

Design Polymerics

Technology:

Acrylic

Application:

Building Envelope and Components HVAC

Market:

Building Construction

Available Packaging

Size

Part Number

Quantity

Picture

Size 1/12 GALLON TUBES (10.2 oz)

Part Number TEMP

Quantity 1

Picture

Size 1 GALLON PAILS

Part Number TEMP

Quantity 1

Picture

Related Products

Viewing options:

DP 1010 Spray

Water Based Duct Sealant Spray

A premium grade, UL Listed, Low VOC, smooth, water based, UL Listed, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. DP 1010 Spray is specially formulated for application by airless sprayers...

SDS TDS

DP 240 / DP 340

Foil Mastic Tape Duct Sealant

A foil backed butyl mastic rolled sealant tape that is fully cured, high pressure/high velocity rated for use on commercial and residential supply and return air ducts. DP Foil Mastic Tape is pressure sensitive and requires no cure...

SDS TDS

DP 1010

Water Based Duct Sealant

A premium grade, UL Listed, Low VOC, smooth, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1010 allows for better coverage and ease of application....

SDS TDS

DP 1020

Water Based Duct Sealant

A premium quality, UL Listed, Low VOC, fiber reinforced, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1020 allows for easier sealing of holes and...

TDS

DP 2595

Closed Cell Foam Spray Adhesive

A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...

SDS

DP 502

100% RTV Silicone Sealant

A high-performance HVAC, industrial, commercial, and residential construction grade 100% Acetoxy RTV Silicone adhesive/sealant that is UL and NSF Recognized. It has excellent resistance to aging, weathering, and UV degradation. DP 502 will provide long term performance on...

TDS