DP 5050

Features

Premium grade with smooth consistency for coverage
GREENGUARD Gold Certified
LEED V4 Qualified
UL Listed
Low VOC
Meets Requirements of NFPA 90A & 90B, ASTM E-84, and UL-723
Excellent Water and U.V. Resistance
Meets CDPH Emission Requirements
Excellent Workability
Meets FDA, USDA, and EPA Standards
Crack and Peel Resistant
Mold and Mildew Resistant
Excellent Dry Adhesion
Indoor and Outdoor Usage
Sag Resistant
Paintable with latex or epoxy paints after cured

Properties

Color

Gray

Base

Water

Chemical Family

Synthetic Latex

Solids Content

66 ± 2%

Viscosity

Approx. 110,000 - 130,000 cps

Application Temperature

40°F - 110°F

Storage Temperature

40°F - 110°F

Service Temperature

-25°F - 200°F

Freeze/Thaw Stability

Do not allow to freeze

Flammability

Non-flammable wet or dry

Flash Point

No flash to boiling

Shelf Life

1 Year (unopened containers)

Cure Time

24-72 hours depending on temperature, humidity, and application

Clean Up

Use warm water and soap

Permanance Rating

Greater than 1 perm, ASTM E-96, 3/32 inch wet application

Coverage

Dependent on application thickness, 40-80 sq. ft. at 20-40 wet mils

Packaging

1 gallon pails, 2 gallon pails, 5 gallon pails

VOC

2 g/l

Downloads

Additional information

Brand:

Design Polymerics

Technology:

Acrylic

Application:

Building Envelope and Components HVAC

Market:

Building Construction

Available Packaging

Size

Part Number

Quantity

Picture

Size 1 GALLON PAILS

Part Number TEMP

Quantity 1

Size 2 GALLON PAIL

Part Number TEMP

Quantity 1

Picture

Size 5 GALLON PAILS

Part Number TEMP

Quantity 1

Related Products

Viewing options:

DP 2595

CLOSED CELL FOAM SPRAY ADHESIVE

A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...

SDS

DP 3050 HV

HIGH VISCOSITY WATER BASED LAGGING ADHESIVE

A high viscosity, premium quality, Low VOC, water based, quick drying, low odor lagging adhesive and protective coating for indoor use. DP 3050 HV can be used for bonding and coating jackets of canvas, glass cloth and other...

SDS TDS

DP 3060

LOW VISCOSITY WATER BASED LAGGING ADHESIVE

A low viscosity, premium quality, UL Classified, Low VOC, water based, quick drying, low odor lagging adhesive and protective coating for indoor use. The lower viscosity of DP 3060 makes it an ideal lap adhesive for pipe insulation...

SDS

DP 40

BUTYL JOINT SEALANT

A skinning, permanently flexible butyl joint sealant that is ideal for low and high temperature insulation applications. DP 40 is recommended to seal joints in cellular foam glass and remains flexible to -70° F. DP 40 acts as...

TDS

DP 2585

POLYSTYRENE FOAM SPRAY ADHESIVE

A premium quality, solvent based, high performance, fast drying, polystyrene insulation adhesive. DP 2585 is water resistant and temperature resistant to 180° F. It is ideal for bonding polystyrene, polyisocyanurate and phenolic foam insulation sheets and block without...

SDS

DP 3030

WATER BASED VAPOR RETARDER

A water-based, premium quality, low odor, quick drying, water resistant, vapor retarder mastic for commercial and residential use. DP 3030 is bright white and is formulated to have excellent brush and trowel application properties. DP 3030 is recommended...

SDS TDS