EP-100 SEAL | Epoxy Healer/Sealer for Concrete

Features

Excellent bond strength
Moisture insensitive
High early strength
Easy to mix - 2:1 ratio
100% solids
Low viscosity
High tensile strength providing for superior retention of aggregates
Solvent-free
Low odor
Designed for automated pump or hand mix application

Applications

Bridge decks
Parking decks
Concrete floors
Roadways
Airport runways/taxiways
Columns & beams in splash zones
Consolidation of porous & dusting surfaces
Primer or pre-treatment for subsequent epoxy or urethane deck coatings

Properties

Laboratory Tests

Results

C-881 Viscosity

Results <250 cps

C-881 Gel Time

Results 20-30 Minutes

C-884 Thermal Compatibility

Results Pass

D-2240 Shore D Hardness

Results 70-80

D-570 Absorption

Results 0.1%

C-882 Bond Strength (2 day cure)

Results 2,000-3,000 psi

C-882 Bond Strength (14 day cure)

Results 2,800-3,200 psi

C-883 Shrinkage

Results Pass

D-695 Compressive Modulus

Results 80,000-120,000 psi

C-695 Compressive Strength

Results 6,000-7,500 psi

D-2566 Linear Coefficient of Shrinkage

Results 0.0021

D-638 Tensile Strength

Results 5,700 psi

D-638 Tensile Elongation

Results 30-40%

D-790 Flexural Strength

Results 5,000-7,000 psi

Percent Solids

Results 100%

VOC Content

Results 0 g/L

ACI 503R Adhesion to Concrete

Results >500 psi (concrete failure)

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name EP100-SEAL SDS Part A

File Size 208.3 KB

View

Safety Data Sheet

Document Name EP100-SEAL SDS Part B

File Size 205.7 KB

View

Technical Data Sheet

Document Name EP100-SEAL TDS

File Size 97.6 KB

View

Miscellaneous

Document Name EP100-SEAL Physical Properties

File Size 186.6 KB

View

Miscellaneous

Document Name EP100-SEAL flyer

File Size 1.3 MB

View

Additional information

Brand:

E-Chem

Technology:

Epoxy

Application:

Bridge, Roadway Safety, and Preservation

Market:

Infrastructure

Related Products

Viewing options:

EP100-SEAL LM

Low -viscosity, low surface tension, 100% solids epoxy

EP100-SEAL LM is a highly penetrating, two-component epoxy healer/sealer.

TDS

EP-CLEARSEAL

100% solids, interior and exterior, high-gloss epoxy sealer

EP-CLEARSEAL is a two-component, moisture-insensitive, self priming, impermeable, high-gloss epoxy sealer that exhibits excellent bond strength. EP-CLEARSEAL uses a cycloaliphatic amine curing system for color retention and chemical resistance.

TDS

EP75-SEAL

Low-viscosity, low surface tension, penetrating healer/sealer

EP75-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.

TDS

EP100-SEAL HM

Low-viscosity, low surface tension, 100% solids epoxy

EP100-SEAL HM is a highly penetrating, two-component epoxy healer/sealer.

TDS

EP50-OVERLAY

Moisture-insensitive, low-modulus epoxy-urethane co-polymer overlay resin

EP50-OVERLAY is a solvent-free, moisture-insensitive, 100% solids, low-modulus, two-component polymer designed primarily for bonding skid-resistant overlays.

TDS

TRANSIL® 244(+)

Densifying Waterproofer and Chloride Ion Barrier

Transil® 244(+) is a premium Nano-Lithium® hardener, densifier, and hydrophobic sealer ideal for protecting concrete and masonry surfaces against damage from freeze-thaw cycles, moisture, and chloride ion intrusion.

SDS TDS

Get in touch to learn more

Speak to us on 505-832-3667

EP100-SEAL - Low-viscosity, low surface tension, 100% solids epoxy

Features

Applications

Properties

Downloads

Additional information