EPO-TEK® E4110 - Electrically Conductive Adhesive

Highly thixotropic epoxy with non-flowing properties and high temperature resistance. 

Pentra-Sil® (AC) is an advanced alkalinity control treatment that reacts with concrete to neutralize its pH levels. Through this permanent reaction, slab sweating and efflorescence is significantly reduced. The lithium silicate in this product also densifies and hardens...

HFP 1:1 is a moisture-insensitive, low-modulus, two component, high friction surface polymer designed for binding high friction surfacing aggregates to asphalt, concrete on grade and elevated surfaces.

SlabArmor™ Starter is a colloidal silica concrete curing/finishing aid and hardener used in the placement and finishing of new concrete. Its hydrophilic property holds bleed water in the capillaries of the concrete slab during the curing process, reducing...

EPX50-OVERLAY is a moisture-insensitive, low-modulus, 3/8” two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as...

ASF-GEL is a two-component, styrene-free, epoxy acrylate adhesive gel with an extended installation range from 15°F to 95°F.