EPO-TEK® N20E - Electrically Conductive Adhesive

EPX50-OVERLAY FAST is a fast-setting, moisture-insensitive, low-modulus, two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as a binder...

This elastomeric, Polyurea joint filler (formerly known as JF-311) allows 10-15% movement of installed joint width and can be used in temperatures between -40 °F to 120 °F (-40 °C to 49 °C). Available in cartridges and in...

Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....

EP75-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.

For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...

Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...