Features
Properties
Downloads
Certifications
Available Packaging
Notes
*Must order 1 each of component A and B
Related Products

Get in touch to learn more
Speak to us on 800-892-1880
Contact us此网站透过 Google 翻译来提供内容翻译,有时翻译未必准确。
This site uses Google Translate to provide translation and may not always be accurate.
Vertalingen van deze website worden vertaald met Google Translate en zijn mogelijk niet altijd accuraat.
Ce site se sert de Google Traduction pour traduire son contenu et peut parfois présenter des erreurs.
Ce site utilise Google Translate pour fournir des traductions qui peuvent ne pas toujours être exactes.
Diese Website verwendet Google Translate, um Übersetzungen bereitzustellen, deren Genauigkeit und Zuverlässigkeit jedoch nicht garantiert werden kann.
Questo sito utilizza Google Translate per tradurre e non è garantito che il risultato sia sempre accurato.
本サイトが提供する翻訳文はGoogle翻訳を利用しており、必ずしも正確な翻訳であるとは限りません。
이 사이트는 Google 번역을 사용하여 번역을 제공하고 있으며 그 내용이 정확하지 않을 수 있습니다
Este sitio utiliza Google Translate para ofrecer traducciones y puede que no siempre sea preciso.
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use.
Made in the USA, ULTRABOND 1 offers longer working time for warmer climates with a wide in-service temperature range. It’s also moisture insensitive, allowing installation and curing in damp environments.
For anchoring threaded rod, bolts and rebar dowels into concrete, ULTRABOND 1 is tested by the American Association of State Highway and Transportation Officials’ NTPEP to perform as promised.
ULTRABOND 1 – Evaluated by National Transportation Product Evaluation Program (NTPEP)
*Must order 1 each of component A and B
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...
High Strength Anchoring Epoxy
Smooth, non-sag, non-abrasive consistency ideal for use in bulk dispensing systems without adverse wear on pumps. Extensive DOT approvals. Available in cartridges and bulk with ATC.
Cold Weather Doweling Adhesive
ULTRABOND® ASF-2000 is a domestically manufactured, two-component styrene free, acrylic adhesive used for anchoring and doweling applications in uncracked concrete with threaded rod and rebar. It is suitable for use in temperatures between 5 °F and 110 °F...
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...
Gel Doweling Adhesive
High-Strength, Fast Gel, Non-Sag Doweling Epoxy
Non-sag, high-modulus, high-strength doweling gel
EP-GEL FAST is a two-component, 100% solids, high-modulus epoxy gel adhesive that offers exceptional strength in doweling and anchoring applications.
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...
High Strength Anchoring Epoxy
Smooth, non-sag, non-abrasive consistency ideal for use in bulk dispensing systems without adverse wear on pumps. Extensive DOT approvals. Available in cartridges and bulk with ATC.
Cold Weather Doweling Adhesive
ULTRABOND® ASF-2000 is a domestically manufactured, two-component styrene free, acrylic adhesive used for anchoring and doweling applications in uncracked concrete with threaded rod and rebar. It is suitable for use in temperatures between 5 °F and 110 °F...
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...
Speak to us on 800-892-1880
Contact us