Downloads
Related Products

PILE ANCHOR GROUT
Fast-strength, fast-setting epoxy anchoring grout
PILE ANCHOR GROUT is a two-component, 100% solids, high strength, pourable epoxy anchoring grout.

CONVERGENT Pentra-Cure® (MH)
Concrete Cure, Hardener and Densifer
Pentra-Cure™ (MH) is an eco-friendly, all-in-one treatment that cures, hardens and densifies fresh concrete with one application. It provides long-term protection for commercial and industrial floors against heavy wear and abuse. This unique solution forms a membrane on...

ULTRABOND® HYB-2CC
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...

EPO-TEK® H20E-MP
Electrically Conductive Silver Epoxy
Low outgassing silver epoxy meeting MIL-STD 883 /5011 and NASA ASTM E595.

ASI COMPOUND 70
Multi-Purpose Silicone Grease and Lubricant
ASI Compound 70 Multi-Purpose Silicone Grease is a moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F to 400°F.This stiff, tacky compound is non-melting and retains its properties over extended periods...

EPO-TEK® HYB-353ND-TX2
UV Hybrid Epoxy
A single component, high temperature hybrid epoxy for semiconductor, and fiber optic applications.
PILE ANCHOR GROUT
Fast-strength, fast-setting epoxy anchoring grout
PILE ANCHOR GROUT is a two-component, 100% solids, high strength, pourable epoxy anchoring grout.
CONVERGENT Pentra-Cure® (MH)
Concrete Cure, Hardener and Densifer
Pentra-Cure™ (MH) is an eco-friendly, all-in-one treatment that cures, hardens and densifies fresh concrete with one application. It provides long-term protection for commercial and industrial floors against heavy wear and abuse. This unique solution forms a membrane on...
ULTRABOND® HYB-2CC
High Strength Concrete Anchoring Adhesive
For cracked and uncracked concrete, ULTRABOND® HYB-2CC is IBC approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F. Approved...
EPO-TEK® H20E-MP
Electrically Conductive Silver Epoxy
Low outgassing silver epoxy meeting MIL-STD 883 /5011 and NASA ASTM E595.
ASI COMPOUND 70
Multi-Purpose Silicone Grease and Lubricant
ASI Compound 70 Multi-Purpose Silicone Grease is a moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F to 400°F.This stiff, tacky compound is non-melting and retains its properties over extended periods...


Get in touch to learn more
Speak to us on 401-946-5564
Contact us














