CONVERGENT SlabArmor™ Seal&Shine Finish
High-Performance, High-Gloss Concrete Finisher and Sealer
Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...
CONVERGENT SlabArmor™ Starter
Colloidal Silica Concrete Curing/Finishing Aid and Hardener
SlabArmor™ Starter is a colloidal silica concrete curing/finishing aid and hardener used in the placement and finishing of new concrete. Its hydrophilic property holds bleed water in the capillaries of the concrete slab during the curing process, reducing...
CONVERGENT STRiON:FORTIFY
Revolutionary spray-on, silica-free densifier
STRiON:Fortify is a revolutionary new method of concrete densification and hardening. Using groundbreaking new silica-free technology, STRiON relies on an ionic transfer process to disperse deep into concrete to make it more resilient, resistant to traffic, dustproof, easy...
CONVERGENT STRION:FORTIFY MAX
The Highest Performing, Easiest to Use Densifier on the Market. The Next Evolution of the STRiON Technology.
Not only is it remarkably easy to apply, but it can be applied at temperatures as low as 25°F – and no rinsing is required, making it not only simple but also easy on the environment. It can...
CRACKBOND® 2300 GEL
Non-Sag Viscosity, High-Strength Bonding Agent
CRACKBOND® 2300 GEL (formerly ULTRABOND® 2300) is a two-component, 100% solids, high-strength epoxy bonding adhesive. It is a solvent free, high modulus, moisture insensitive, non-sag epoxy system. CRACKBOND® 2300 GEL is ideal for use in temperatures from 60°F...
CRACKBOND® BRIDGE-GARD
Epoxy Concrete Overlay
CRACKBOND® BRIDGE-GARD is a multi-purpose epoxy polymer concrete overlay system designed for high-stress infrastructure applications. It may be successfully applied and cured at temperatures between 65 °F and 95 °F (18 °C and 35 °C).
CRACKBOND® CSR
Low Viscosity Polyurethane For Fast Repair of Cracks and Spalls in Concrete
2-component polyurethane hybrid formulations. Extreme low viscosity and rapid cure for quick repairs of cracks and spalls in concrete. Find a selection of concrete repair and restoration adhesives for buildings and transportation infrastructure.
CRACKBOND® EPOTHANE T3
Epoxy-Urethane Hybrid Type III Overlay
CRACKBOND® EPOTHANE T3 is a low-modulus, epoxy urethane skid-resistant overlay. It may be successfully applied and cured at temperatures between 60 °F and 95 °F (16 °C and 35 °C).
CRACKBOND® EPOXY REPAIR PASTE
Multi-Purpose Structural Repair Paste
Two component, moisture insensitive, high modulus, epoxy paste available in cartridges and bulk kits. Ideal as a bonding agent, filler, capping material for crack injection or as a pick-proof sealant.
