EP17-GROUT
Mid-Strength Epoxy Grout
A mid-strength epoxy grout used primarily with wind applications. Early strength profile allows faster project times and early tensioning and stacking. This grout can reach 17,000 PSI compressive strength within 48 hours of placement. The savings will help...
EP19-GROUT
High-Strength Epoxy Grout
A high-strength epoxy grout used primarily when extreme early compressive strength is required. With past experience using this grout and results greater than 20,000 PSI in 24 hours, it is a game changer for the extra large compressor...
EP20-CHOCK
Epoxy Machine Grout
EP20-CHOCK is a two-component, 100% solids, high performance epoxy machine chock. It is characterized by high early and ultimate strength, high bearing area, negligible shrinkage and creep, fast cure and excellent flowability.
EP50-OVERLAY
Low Modulus Polymer Resin Overlay
EP50-OVERLAY is a solvent-free, moisture-insensitive, 100% solids, low-modulus, two-component polymer designed primarily for bonding skid-resistant overlays.
EP75-SEAL
Penetrating Healer and Urethane Sealer
EP75-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.
EPO-TEK® 301
Low Viscosity Optical Grade Epoxy
Room temperature curing epoxy featuring very low viscosity, clear and excellence optical-mechanical properties.
EPO-TEK® 301-1
Spectrally Transparent Epoxy
This is a two-component, room temperature curing epoxy featuring very low viscosity and excellent optical and mechanical properties. It is a lower viscosity version of EPO-TEK® 301.
EPO-TEK® 301-2
Optically Transparent Epoxy Resin
Optically transparent and semiconductor grade epoxy resin with low viscosity, long pot life and good handling characteristics.
EPO-TEK® 301-2FL-CX
Low Viscosity Optical Epoxy
This a two component optical epoxy low index version of EPO-TEK® 301-2FL. It features very low viscosity and excellent optical-mechanical properties.
