Features
- Seals & Adheres
- Excellent Flexibility
- Paintable
- Resistant To UV Degradation & Weathering
- Good Adhesion Range
- Excellent Long-Term Physical Properties
- Non-Slump, Can Use On Overhead & Vertical Applications
- Non-Staining To Most Substrates
- Easy To Dispense And Tool At A Variety Of Temperatures
Benefits
- Chemical Resistant
- Color Stable
- Creates a Waterproof Seal
- Excellent for Indoor and Outdoor Applications
- Excellent Long Term Physical Properties
- Highly Flexibile/Allows for Movement
- Long Life
- Mold and Mildew Resistant
- Non-Slump – Overhead/Vertical Applications
- Non-Yellowing
- One-Component
- Paintable
- Solvent-Free
- UV Resistant/Degredation
- VOC Compliant
- Water Repellant
- Will Not Crack
Properties
- *Intermittent temperature up to 230°F. Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. ASI 12SK suggested application temperature range: 32°F to 150°F. ASI 12SK can be applied lower than 32°F, however, it will slow down the curing speed. In general lower temperature & humidity will slow skin and cure times. Testing should be done to confirm temperature requirements are met. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department
Substrates
- Glass
- Steel
- Cement
- Painted Metal
- Many Plastics
- Aluminum & Galvanized Metal
- Wood
- EPDM
- Porous Surfaces (Concrete, Brick, Etc.)
Related Products
CONVERGENT SlabArmor™ Seal&Shine Finish
High-Performance, High-Gloss Concrete Finisher and Sealer
Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...
CONVERGENT Pentra-Guard® (EXT)
Sealers & Guards
Pentra-Guard® (EXT) is an eco-friendly, exterior stone sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing the natural color and shine. This treatment creates a breathable, protective...
CONVERGENT Pentra-Sil® (H)
Single-Application Hardener for Slabs and Tilt-Up
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...
CONVERGENT Pentra-Sil® (IH)
Improves gloss and clarity in polishing terrazzo, stone and concrete
Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...
CONVERGENT Pentra-Shield®
Hardener, Densifier & Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...
DP 1090
WATER BASED DUCT SEALANT
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...
CONVERGENT SlabArmor™ Seal&Shine Finish
High-Performance, High-Gloss Concrete Finisher and Sealer
Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...
CONVERGENT Pentra-Guard® (EXT)
Sealers & Guards
Pentra-Guard® (EXT) is an eco-friendly, exterior stone sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing the natural color and shine. This treatment creates a breathable, protective...
CONVERGENT Pentra-Sil® (H)
Single-Application Hardener for Slabs and Tilt-Up
Pentra-Sil® (H) provides maximum hardening for concrete slabs and tilt-up construction. This lithium-based, pre-cure hardener reduces dusting and makes the surface more water, stain and abrasion resistant while increasing surface sheen over time. Pentra-Sil® (H) is applied in...
CONVERGENT Pentra-Sil® (IH)
Improves gloss and clarity in polishing terrazzo, stone and concrete
Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...
CONVERGENT Pentra-Shield®
Hardener, Densifier & Sealer
Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that provides freeze-thaw, scaling and spalling protection. This treatment strengthens concrete sidewalks and driveways to minimize damage caused by winter weather. Pentra-Shield® is a penetrating, breathable solution...
DP 1090
WATER BASED DUCT SEALANT
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...
Get in touch to learn more
Speak to us on 800-325-7040
Contact us