Features
- 100% Neutral Cure Oime Silicone
- Advanced Adhesion Properties To Construction Substrates
- Extremely Resistant to UV Degradation & Weathering
- Withstands Extreme Cold & Extreme Heat
- 35% Joint Movement Capability
- One-Component, Easy To Use Formulation
- Cures To Form An Extremely Durable Rubber
- Resists Extreme Temperatures & Chemicals
- Easy to Extrude At Cold Temperatures
- Mold & Mildew Resistant
- Non-Slump, Can Use On Overhead & Vertical Applications
- Excellent For Indoor & Outdoor Applications
- Creates A Waterproof seal
Benefits
- 100% Silicone
- Advanced/High Joint Movement
- Chemical Resistant
- Color Stable
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Excellent for Indoor and Outdoor Applications
- Highly Flexibile/Allows for Movement
- Long Life
- Low Odor
- Moisture Curing
- Mold and Mildew Resistant
- Multiple Color Choices
- Non-Corrosive
- Non-Melting
- Non-Slump – Overhead/Vertical Applications
- Non-Yellowing
- One-Component
- Rain Ready
- RTV
- Solvent-Free
- UV Resistant/Degredation
- VOC Compliant
- Water Repellant
- Weather Resistant
- Will Not Crack
- Withstands Extreme Temperatures
Properties
- *Intermittent temperature up to 450°F. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department.
Substrates
- Glass
- Concrete, Brick, Mortar (Porous Substances)
- Vinyl
- Most Metals (Including Uncoated)
- Most Wood Types, Cement Board & Fiber Board
- Aluminum
- Ceramic
- Most Fiberglass
- Most Painted Surfaces
Downloads
Certifications

- ASTM C920 Class 35, Type S, Grade NS, Use NT, G, A, O
- TT-S-01543A
- TT-S-00230-C
- VOC Compliant (21 grams/liter ASTM D2369)
- AAMA 802.3-10, Type II Back Bedding Glazing Compound
- AAMA 803.3-10, Spec For Narrow Joint Seam Sealers, Type 1
- AAMA 805.2-10, Spec For Back Bedding Glazing Compound, Group C
- Meets the requirements of MIL 46106B Type 1
Additional information
ADDITIONAL COMMON APPLICATIONS
- Window Manufacturing & Assembly
- Window Installation
- Metal Roofing Installation
- Door Manufacturing & Assembly
- Door Installation
- Siding Installation & Sealing
- Portable Housing
- RV Applications
- Glass Glazing
- Construction Applications
- Glass Block Installation & Sealing
- General Sealing & Bonding Applications
Available Packaging
Notes
ASI 335 Window & Door Sealant is stocked in cartridges. Additional packaging may be available upon request. Inquire to ASI sales staff for additional information.
Related Products

Synthetic Latex Adhesives
Evans Adhesive's synthetic latex adhesives offer versatile, high-strength bonding for multiple applications, including building and construction, providing durability, flexibility, and excellent adhesion for a wide range of materials and surfaces.

ASI 600
Extreme Temperatures Heat Resistant Silicone
ASI 600 Hi-Temp Resistant RTV Silicone is a one-component, moisture cure, 100% RTV silicone that cures to form an extremely durable rubber that can withstand extreme heat while maintaining its physical properties.Due to the formulation, ASI 600 can...

CONVERGENT Pentra-Sil® (IH)
Polished Concrete Densifier and Hardener
Pentra-Sil® (IH) was designed to give concrete polishers an easy-to-use densifier that greatly improves the final finish of polished concrete by dramatically hardening the substrate and allowing abrasive tooling to work more efficiently and effectively. The Pentra-Sil® (IH)...

CONVERGENT Pentra-Finish™ (HG)
High Gloss, Stain and Wear Protection Sealer
Pentra-Finish™ (HG) is the highest performing stain and wear protection finish for polished concrete, terrazzo, masonry and other cementitious surfaces. This patented, high-gloss, easy-to-use lithium sealer, creates a microfilm that will not peel, flake or bubble and improves...

DP 1090
Low Verosity Duct Sealant
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...

ASI 57
Hybrid Polymer Sealant and Adhesive
ASI 57 Hybrid Class 50 Hybrid Sealant and Adhesive is a one-part, low odor, no-sag polyether sealant that uses ASI’s innovative hybrid technology to produce a material that is ideal for a wide range of applications where a...
Synthetic Latex Adhesives
Evans Adhesive's synthetic latex adhesives offer versatile, high-strength bonding for multiple applications, including building and construction, providing durability, flexibility, and excellent adhesion for a wide range of materials and surfaces.
ASI 600
Extreme Temperatures Heat Resistant Silicone
ASI 600 Hi-Temp Resistant RTV Silicone is a one-component, moisture cure, 100% RTV silicone that cures to form an extremely durable rubber that can withstand extreme heat while maintaining its physical properties.Due to the formulation, ASI 600 can...
CONVERGENT Pentra-Sil® (IH)
Polished Concrete Densifier and Hardener
Pentra-Sil® (IH) was designed to give concrete polishers an easy-to-use densifier that greatly improves the final finish of polished concrete by dramatically hardening the substrate and allowing abrasive tooling to work more efficiently and effectively. The Pentra-Sil® (IH)...
CONVERGENT Pentra-Finish™ (HG)
High Gloss, Stain and Wear Protection Sealer
Pentra-Finish™ (HG) is the highest performing stain and wear protection finish for polished concrete, terrazzo, masonry and other cementitious surfaces. This patented, high-gloss, easy-to-use lithium sealer, creates a microfilm that will not peel, flake or bubble and improves...
DP 1090
Low Verosity Duct Sealant
A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...


Get in touch to learn more
Speak to us on 800-325-7040
Contact us



















