Features
- Ideal for Industrial & Construction
- Mold & Mildew Resistant Resistant
- To UV Degradation & Weathering
- Withstands Extreme Cold & Extreme Heat
- One-Component, Easy To Use Formulation
- Adheres To Most Common Building Substrates
- Easy To Extrude At Cold Temperatures
- Non-Slump, Can Use On Overhead & Vertical Applications
- Excellent For Indoor & Outdoor Applications
- Creates A Waterproof Seal
Benefits
- 100% Silicone
- Chemical Resistant
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Excellent for Indoor and Outdoor Applications
- High Temperature Resistance
- Highly Flexibile/Allows for Movement
- Long Life
- Low Temperature Resistance
- Mold and Mildew Resistant
- Non-Slump – Overhead/Vertical Applications
- One-Component
- Rain Ready
- RTV
- Solvent-Free
- UV Resistant/Degredation
- VOC Compliant
- Weather Resistant
- Will Not Crack
- Withstands Extreme Temperatures
Properties
- *Intermittent temperature up to 450°F. Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. ASI 502 suggested application temperature range: -35°F to 150°F. Testing should be done to confirm temperature requirements are met. Information on this data sheet can change without notice and it is therefore not recommended that these figures be used in spec writing. If you have any questions contact manufacturer‘s sales and technical service department.
Substrates
- Glass
- Granite
- Marble
- Metal
- Ceramic
- Aluminum
- Most Types Of Wood
- Natural & Synthetic Fiber
- Most Fiberglass
- Most Painted Surfaces
- Some Plastics
Downloads
Certifications


- ASTM C920 Class 25, Type S, Grade NS, Use NT, G, O
- TT-S-01543A
- TT-S-00230-C
- MIL 46106B Type 1
- NSF Standard 51
- FDA Regulation No. 21 CFR 177.2600
- UL Recognized
- VOC Compliant (23 grams/liter ASTM D2369)
Additional information
ADDITIONAL COMMON APPLICATIONS
- Industrial, Construction
- HVAC/Ductwork Applications
- Appliance Manufacturing
- Refrigeration Units
- Walk-In Freezer Manufacturing & Installation
- Sealing Trailers
- Formed In Place Gaskets
- Sheet Metal
- Countertops
- Sanitary Seals
- Plumbing
- General Sealing & Adhering
- Marine Applications
- Telecommunications Including Coaxial Cable Connectors
- RV & Trailer Manufacturing Formed-In-Place Gasket Applications
- Kitchen & Bathroom
- Fireplace Manufacturing
- Sheet Metal Work & Sealing
Available Packaging
Notes
ASI 502 is stocked in squeeze tubes, cartridges, pails and drums. It can also be packaged in quart cartridges, sausage packs, semcos and pouches. Additional packaging may be available upon request. Inquire to ASI sales staff for additional information.
Related Products

Hot Melt Adhesives
Evans Adhesive's hot melt adhesives provide fast-setting, durable bonds for packaging and converting industries, offering reliable performance, efficient application, and strong adhesion to meet the demands of high-volume production environments.

DP 2595
Closed Cell Foam Spray Adhesive
A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...

CONVERGENT Pentra-Guard® (EXT)
Color Enhancing Exterior Concrete and Masonry Sealer
Pentra-Guard® (EXT) is a protective exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing natural color and shine. Ideal for colored concrete, walkways, patios and pavers....

DP 2501
Water Based Duct Liner Adhesive
A premium grade, water based, UL Classified duct liner adhesive specifically formulated for spray, brush, roller and coil line applications. It can be used to seal cut edges of fiberglass duct liner. DP 2501 can also be used...

DP 240 / DP 340
Foil Mastic Tape Duct Sealant
A foil backed butyl mastic rolled sealant tape that is fully cured, high pressure/high velocity rated for use on commercial and residential supply and return air ducts. DP Foil Mastic Tape is pressure sensitive and requires no cure...

CONVERGENT Pentra-Clean™ (DC)
Multi-Surface, Acid-Free Daily Cleaner
Pentra-Clean™ (DC) Daily Cleaner easily removes stains, dirt, grease and grime from concrete, terrazzo, natural stone and tile floor surfaces. This product is easy to use, leaves no film or residue and has a neutral pH with no...
Hot Melt Adhesives
Evans Adhesive's hot melt adhesives provide fast-setting, durable bonds for packaging and converting industries, offering reliable performance, efficient application, and strong adhesion to meet the demands of high-volume production environments.
DP 2595
Closed Cell Foam Spray Adhesive
A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...
CONVERGENT Pentra-Guard® (EXT)
Color Enhancing Exterior Concrete and Masonry Sealer
Pentra-Guard® (EXT) is a protective exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing natural color and shine. Ideal for colored concrete, walkways, patios and pavers....
DP 2501
Water Based Duct Liner Adhesive
A premium grade, water based, UL Classified duct liner adhesive specifically formulated for spray, brush, roller and coil line applications. It can be used to seal cut edges of fiberglass duct liner. DP 2501 can also be used...
DP 240 / DP 340
Foil Mastic Tape Duct Sealant
A foil backed butyl mastic rolled sealant tape that is fully cured, high pressure/high velocity rated for use on commercial and residential supply and return air ducts. DP Foil Mastic Tape is pressure sensitive and requires no cure...
CONVERGENT Pentra-Clean™ (DC)
Multi-Surface, Acid-Free Daily Cleaner
Pentra-Clean™ (DC) Daily Cleaner easily removes stains, dirt, grease and grime from concrete, terrazzo, natural stone and tile floor surfaces. This product is easy to use, leaves no film or residue and has a neutral pH with no...


Get in touch to learn more
Speak to us on 800-325-7040
Contact us



















