Pentra-Sil® (HD) | High Performance Lithium Densifier

Features

Uses patented Nano-Lithium® technology
Increases abrasion resistance
Penetrates: no film to lift or peel off
Reduces efflorescence and surface sweating
Does not contribute to surface ASR or promote crazing
Prolongs finish of polished surfaces
Resists stains and dusting, making concrete and facilities easier to maintain
VOC compliant, may contribute to LEED points (IEQ credit)

Properties

Water-based solution
Penetrates up to ¼ inch (7mm) where it reacts with free calcium to form insoluble calcium silica hydrate, providing water, stain and abrasion resistance

Application method

Sprayer

Color

Green tint, dries clear

Coverage rate

Machine-troweled: 550-750 ft² per gallon (13.5-18.4 m² per liter) Broom-finished: 200-400 ft² per gallon (4.9-9.8 m² per liter)

Film-forming

Form

Liquid

Freeze point

32ºF (0ºC)

Odor

Slight to none

11-12

Shelf life

1 year in unopened, sealed container

Specific gravity

1.11

Total solids

16.0%

VOC content

<50g/L

Downloads

Type

Document Name

File Size

Safety Data Sheet

Document Name Pentra-Sil® (HD) SDS

File Size 211.8 KB

View

Technical Data Sheet

Document Name Pentra-Sil® (HD) TDS

File Size 891.8 KB

View

Brand:

Adhesives Technology

Technology:

Lithium, Colloidal & Strontium

Application:

Building Envelope and Components

Market:

Building Construction Infrastructure

Available Packaging

Size

Part Number

Quantity

Picture

Size 1 Gallon Jug

Part Number CCT-050-1

Quantity 126

Picture

Size 5 Gallon Pail

Part Number CCT-050-5

Quantity 35

Picture

Size 55 Gallon Drum

Part Number CCT-050-55

Quantity 4

Picture

Size 275 Gallon Tote

Part Number CCT-050-275

Quantity 1

Picture

Related Products

Viewing options:

CONVERGENT STRION:FORTIFY MAX

The Highest Performing, Easiest to Use Densifier on the Market. The Next Evolution of the STRiON Technology.

Not only is it remarkably easy to apply, but it can be applied at temperatures as low as 25°F – and no rinsing is required, making it not only simple but also easy on the environment. It can...

SDS TDS

CONVERGENT SlabArmor™ Starter

Colloidal Silica Concrete Curing/Finishing Aid and Hardener

SlabArmor™ Starter is a colloidal silica concrete curing/finishing aid and hardener used in the placement and finishing of new concrete. Its hydrophilic property holds bleed water in the capillaries of the concrete slab during the curing process, reducing...

SDS TDS

CONVERGENT Pentra-Cure® (MH)

All-In-One Cure, Hardener and Densifier

Pentra-Cure™ (MH) is an eco-friendly, all-in-one treatment that cures, hardens and densifies fresh concrete with one application. It provides long-term protection for commercial and industrial floors against heavy wear and abuse. This unique solution forms a membrane on...

SDS TDS

CONVERGENT SlabArmor™ Seal&Shine Finish

High-Performance, High-Gloss Concrete Finisher and Sealer

Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...

SDS TDS

CONVERGENT SlabArmor™ Closer

Colloidal Silica Concrete Densifier/Hardener

SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...

SDS TDS

CONVERGENT Pentra-Sil® (IH)

Improves gloss and clarity in polishing terrazzo, stone and concrete

Pentra-Sil® (IH) is specifically designed for application during the concrete polishing process. This penetrating hardener improves the final appearance by allowing abrasive tooling to work more effectively, increasing final gloss and clarity. It reduces downtime between polishing steps,...

SDS TDS