DP 3030

Features

LEED V4 Qualified
Low VOC
Excellent Workability
Crack and Peel Resistant
Excellent Dry Adhesion
Non-Flammable
Indoor and Outdoor Usage
Excellent Water and U.V. Resistance
Resists Yellowing with Age
Meets the permeance requirements of ASTM C755-20, Section 7.2.2 for below ambient vapor retarder coatings when used as a closure mastic in conjunction with ASJ and other vapor retarder membranes
Meets FDA, USDA, and EPA Standards
Meets Requirements of NFPA 90A & 90B, UL 723, and ASTM E-84

Properties

Color

White

Base

Water

Chemical Family

Synthetic Latex

Solids Content

66 ± 2%

Viscosity

75,000 - 90,000 cps

Application Temperature

40°F - 110°F

Storage Temperature

40°F - 110°F

Service Temperature

-25°F - 200°F

Freeze/Thaw Stability

Do not allow to freeze

Average Perm Rating (ASTM E-96, Method A)

0.12 perms (0.08 metric perms) at 57 mils (1.4 mm) dry film thickness. Sample tested with mesh

Flammability

Non-flammable wet or dry

Flash Point

No flash to boiling

Shelf Life

1 Years (unopened containers)

Cure Time

4-36 hours depending on temperature, humidity, and application rate

Coverage

Dependent on application thickness, 25-50 sq. ft. at 32-64 wet mils

Clean Up

Use warm water and soap

Packaging

1 gallon pails, 2 gallon pails, 5 gallon pails

VOC

≤ 3 g/l

Downloads

Type

Document Name

File Size

Technical Data Sheet

Document Name DP 3030 TDS

File Size 773.5 KB

View

Safety Data Sheet

Document Name DP-3030-SDS

File Size 223.1 KB

View

Certifications

Additional information

Brand:

Design Polymerics

Technology:

Acrylic

Application:

Building Envelope and Components HVAC

Market:

Building Construction

Available Packaging

Size

Part Number

Quantity

Picture

Size 1 GALLON PAILS

Part Number TEMP

Quantity 1

Picture

Size 2 GALLON PAILS

Part Number TEMP

Quantity 1

Size 5 GALLON PAILS

Part Number TEMP

Quantity 1

Size 54 GALLON DRUMS

Part Number TEMP

Quantity 1

Related Products

Viewing options:

DP 5050

WATER BASED WEATHER BARRIER COATING

A medium viscosity, premium quality, Low VOC, water based, high strength, quick drying, low odor weather barrier coating. DP 5050 is recommended for indoor and outdoor use where a breather mastic is required. It is used for bonding...

SDS

DP 2595

CLOSED CELL FOAM SPRAY ADHESIVE

A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...

SDS

DP 2585

POLYSTYRENE FOAM SPRAY ADHESIVE

A premium quality, solvent based, high performance, fast drying, polystyrene insulation adhesive. DP 2585 is water resistant and temperature resistant to 180° F. It is ideal for bonding polystyrene, polyisocyanurate and phenolic foam insulation sheets and block without...

SDS

DP 40

BUTYL JOINT SEALANT

A skinning, permanently flexible butyl joint sealant that is ideal for low and high temperature insulation applications. DP 40 is recommended to seal joints in cellular foam glass and remains flexible to -70° F. DP 40 acts as...

TDS

DP 3060

LOW VISCOSITY WATER BASED LAGGING ADHESIVE

A low viscosity, premium quality, UL Classified, Low VOC, water based, quick drying, low odor lagging adhesive and protective coating for indoor use. The lower viscosity of DP 3060 makes it an ideal lap adhesive for pipe insulation...

SDS

DP 3050

WATER BASED LAGGING ADHESIVE

A medium viscosity, premium quality, UL Classified, Low VOC, water based, quick drying, low odor lagging adhesive and protective coating for indoor use. DP 3050 can be used for bonding and coating jackets of canvas, glass cloth and...

TDS