Features
Downloads
Safety Data Sheet
Related Products
ULTRABOND® 1
Concrete Anchor Epoxy
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....
ULTRABOND® ACRYL-8CC
Fast Cure Anchoring Adhesive
For use in cracked and uncracked normal weight and lightweight concrete, ULTRABOND ACRYL-8CC has a full cure rate of 45 minutes at 70° F (21° C) and an 18-month shelf life. With an extended in-service temperature range of...
ULTRABOND® HARD-ROK
Concrete Strength Anchoring Adhesive
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...
EP-SLV
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...
ULTRABOND® 2
Ultrabond Epoxy
With slower curing for the warmest southern climates, ULTRABOND® 2 provides a long working time of 28 minutes @ 75°F (24°C) and in-service temperatures to 180°F. For anchoring threaded rod into concrete, ULTRABOND® 2 has a 1:1 mix...
ASF-GEL
Epoxy Gel Acrylic Adhesive
ASF-GEL is a two-component, styrene-free, epoxy acrylate adhesive gel with an extended installation range from 15°F to 95°F.
Get in touch to learn more
Speak to us on 505-217-2121
Contact us