EPO-TEK® 730-110 - Thermally and Electrically Insulating Epoxy

Optically clear, low viscosity, 1:1 silicone potting system. Ideal for protection from shock and vibration. 

A skinning, permanently flexible butyl joint sealant that is ideal for low and high temperature insulation applications. DP 40 is recommended to seal joints in cellular foam glass and remains flexible to -70° F. DP 40 acts as...

This elastomeric, Polyurea joint filler (formerly known as JF-311) allows 10-15% movement of installed joint width and can be used in temperatures between -40 °F to 120 °F (-40 °C to 49 °C). Available in cartridges and in...

EP100-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.

When you have hollow spots from uncorrected substrate irregularities Taylor Repair™ can solve the problem without removing flooring. This easy to use system comes with almost everything you need to eliminate the hollow spot permanently.   

SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...