Features
- ICC-ES ESR-4249 for use in cracked and uncracked normal weight and lightweight concrete
- Resists static, wind and earthquake loading in tension and shear – (IBC Seismic Design Categories A through F)
- Certified – Drinking Water System Components (NSF/ANSI 61) Joining and Sealing
- Installation temperature range between 14 °F to 104 °F (-10 °C to 40 °C)
- Resists sustained loads up to 161 °F (72 °C)
- Withstands freeze-thaw conditions
- Acceptable for use in USDA inspected facilities
Properties
- Extended in-service temperature range between 14 °F to 248 °F (-10 °C to 120 °C).
- AASHTO M235 and ASTM C881 Types I, II, IV & V, Grade 3, Class A, B & C
- Full cure in 45 minutes at 70 °F (21 °C)
- 18 month shelf life
Downloads
Certifications
Available Packaging




Related Products

ULTRABOND® 2
Ultrabond Epoxy
With slower curing for the warmest southern climates, ULTRABOND® 2 provides a long working time of 28 minutes @ 75°F (24°C) and in-service temperatures to 180°F. For anchoring threaded rod into concrete, ULTRABOND® 2 has a 1:1 mix...

ULTRABOND® 1
Concrete Anchor Epoxy
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....

ULTRABOND® EPX-3CC
High Performance Epoxy Anchor Adhesive
ULTRABOND® EPX-3CC is everything you need, and nothing you don’t, because it’s the perfect balance between high performance and high volume. With an installation temperature range of 48 °F to 108 °F, and a full cure in 4...

ULTRABOND® ASF-2000
Cold Weather Doweling Adhesive
ULTRABOND® ASF-2000 is a domestically manufactured, two-component styrene free, acrylic adhesive used for anchoring and doweling applications in uncracked concrete with threaded rod and rebar. It is suitable for use in temperatures between 5 °F and 110 °F...

EP-SLV
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...

ASF-GEL
Epoxy Gel Acrylic Adhesive
ASF-GEL is a two-component, styrene-free, epoxy acrylate adhesive gel with an extended installation range from 15°F to 95°F.
ULTRABOND® 2
Ultrabond Epoxy
With slower curing for the warmest southern climates, ULTRABOND® 2 provides a long working time of 28 minutes @ 75°F (24°C) and in-service temperatures to 180°F. For anchoring threaded rod into concrete, ULTRABOND® 2 has a 1:1 mix...
ULTRABOND® 1
Concrete Anchor Epoxy
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....
ULTRABOND® EPX-3CC
High Performance Epoxy Anchor Adhesive
ULTRABOND® EPX-3CC is everything you need, and nothing you don’t, because it’s the perfect balance between high performance and high volume. With an installation temperature range of 48 °F to 108 °F, and a full cure in 4...
ULTRABOND® ASF-2000
Cold Weather Doweling Adhesive
ULTRABOND® ASF-2000 is a domestically manufactured, two-component styrene free, acrylic adhesive used for anchoring and doweling applications in uncracked concrete with threaded rod and rebar. It is suitable for use in temperatures between 5 °F and 110 °F...
EP-SLV
Low Viscosity Exposy Adhesive
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...


Get in touch to learn more
Speak to us on 800-892-1880
Contact us