EP-MV
Multi-Purpose, High-Modulus, Medium-Viscosity Bonding Adhesive
EP-MV is a 100% solids, two-component, high-modulus, medium-viscosity, moisture-insensitive structural epoxy adhesive designed for bonding freshly mixed concrete to hardened concrete, for bonding hardened concrete to hardened concrete and other materials, and as a binder for epoxy mortars....
EP-SLV
High-Modulus Epoxy Injection Resin Binder
EP-SLV is a 100% solids, high-modulus, moisture-insensitive, very low-viscosity epoxy adhesive for gravity feed or pressure injection of cracks in concrete. EP-SLV is a structural repair adhesive designed primarily for pressure injection and gravity feed crack repair in...
ULTRABOND® 1
Over 20 Years of Trusted Performance
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....
ULTRABOND® 1300
High-Strength, Non-Sag Doweling Epoxy
Smooth, non-sag, non-abrasive consistency ideal for use in bulk dispensing systems without adverse wear on pumps. Extensive DOT approvals. Available in cartridges and bulk with ATC.
ULTRABOND® 1300-FG
High-Strength, Fast Gel, Non-Sag Doweling Epoxy
High-Strength, Fast Gel, Non-Sag Doweling Epoxy
ULTRABOND® 2
Extended Working Time in Warmer Weather
With slower curing for the warmest southern climates, ULTRABOND® 2 provides a long working time of 28 minutes @ 75°F (24°C) and in-service temperatures to 180°F. For anchoring threaded rod into concrete, ULTRABOND® 2 has a 1:1 mix...
ULTRABOND® ACRYL-8CC
Fast Cure Anchoring Adhesive
For use in cracked and uncracked normal weight and lightweight concrete, ULTRABOND ACRYL-8CC has a full cure rate of 45 minutes at 70° F (21° C) and an 18-month shelf life. With an extended in-service temperature range of...
- 1
- 2
