Features
- 100% Solids, Will Not Shrink
- Contains No Solvents Or Isocyanates (VOC Compliant)
- Low Odor, Eco-Friendly
- Resistant To UV Degradation & Weathering
- Easy To Dispense & Tool At A Variety Of Temperatures
- Will Cure When Water Or Moisture Is Present
- Cures To Wet Substrates Without Negative Effects
- Multi-Purpose Sealant & Adhesive Applications
- Broad Adhesion Range
- Non-Slump, Can Use On Overhead & Vertical Applications
- Excellent Long-Term Physical Properties
- Paintable Within 24 Hours
Benefits
- 100% Solids/Will Not Shrink
- Broad Adhesion Range/Bonds to Common Substrates
- Color Stable
- Compatible with Electronics
- Creates a Waterproof Seal
- Easy to Dispense at Variety of Temperatures
- Excellent Adhesion
- Excellent for Indoor and Outdoor Applications
- Excellent Long Term Physical Properties
- Long Life
- Low Odor
- Low Temperature Resistance
- MEKO-Free
- Mold and Mildew Resistant
- Multiple Color Choices
- Non-Corrosive
Properties
- *Intermittent temperature up to 270°F. Strength will start to develop immediately and continue increasing for 7 days after application. ASI recommends testing strength and adhesion on the 7th day. ASI 55 suggested application temperature range: 32°F to 150°F. ASI 55 can be applied lower than 32°F. However, it will slow down curing. In general lower temperature & humidity will slow skin and cure times. Information on this data sheet can change without notice. It is not recommended that these figures be used in spec writing. Contact manufacturer‘s sales and technical service department with questions.
Substrates
- Glass
- Ceramic
- Fiberglass
- Wood
- EPDM
- Porcelain
- PVC & Other Plastics
- Aluminum & Galvanized Metal
- Kynar® Coated Substrates
- Marble & Granite
- Concrete, Brick, Mortar (Porous Substances)
- EPS or Styrofoam Insulation
Certifications
- ASTM C920, Type S, Grade NS, Class 25, Uses NT, T, M, G, A & O
- Conforms to California Proposition 65
- Meets USDA Requirements for Non-Food Contact
- Meets Requirements of CARB & SCAQMD
- ASTM E84, Class A, Flame Spread: 0, Smoke Developed: 0
- VOC Compliant
Additional information
ADDITIONAL COMMON APPLICATIONS
- Joint Sealant Applications
- Trailer & RV Manufacturing
- Walk-In Freezer Manufacturing & Installation
- General Construction
- Industrial Manufacturing
- Solar Panel Installation
- Adhesive Applications
- Roofing
- Pre-cast Concrete
- Window & Door Installation
- Weather Sealing
- HVAC Applications
- Appliance Manufacturing
- Masonry Applications
Available Packaging
Notes
ASI 55 is available in 10 oz. caulking cartridges, sausage packs, pails and drums. Additional packaging options may be available. Inquire to ASI sales staff for additional information.
Related Products

DP 5060
Low Viscosity Weather Barrier Coating
A premium quality, low viscosity, Low VOC, water based, high strength, quick drying, low odor weather barrier coating. DP 5060 is recommended for indoor and outdoor use where a breather mastic is required. It is used for bonding...

EPO-TEK® H20E
Silver Filled Electrically Conductive Epoxy
100% solids silver-filled epoxy system for chip bonding in microelectronic and optoelectronic.

DP 1020
Water Based Duct Sealant
A premium quality, UL Listed, Low VOC, fiber reinforced, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1020 allows for easier sealing of holes and...

DP 1010
Water Based Duct Sealant
A premium grade, UL Listed, Low VOC, smooth, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1010 allows for better coverage and ease of application....

CONVERGENT Pentra-Guard® (EXT)
Color Enhancing Exterior Concrete and Masonry Sealer
Pentra-Guard® (EXT) is a protective exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing natural color and shine. Ideal for colored concrete, walkways, patios and pavers....

2590 / 2595 SPRAY GUNS
Adhesive Spray Guns
Spray guns for DP 2590 Duct Liner Adhesive and DP 2595 Closed Cell Foam Adhesive canisters.
DP 5060
Low Viscosity Weather Barrier Coating
A premium quality, low viscosity, Low VOC, water based, high strength, quick drying, low odor weather barrier coating. DP 5060 is recommended for indoor and outdoor use where a breather mastic is required. It is used for bonding...
EPO-TEK® H20E
Silver Filled Electrically Conductive Epoxy
100% solids silver-filled epoxy system for chip bonding in microelectronic and optoelectronic.
DP 1020
Water Based Duct Sealant
A premium quality, UL Listed, Low VOC, fiber reinforced, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1020 allows for easier sealing of holes and...
DP 1010
Water Based Duct Sealant
A premium grade, UL Listed, Low VOC, smooth, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1010 allows for better coverage and ease of application....
CONVERGENT Pentra-Guard® (EXT)
Color Enhancing Exterior Concrete and Masonry Sealer
Pentra-Guard® (EXT) is a protective exterior sealer for concrete, masonry and stone surfaces. It seals and protects against dirt, grime, salt and oil damage while enhancing natural color and shine. Ideal for colored concrete, walkways, patios and pavers....
2590 / 2595 SPRAY GUNS
Adhesive Spray Guns
Spray guns for DP 2590 Duct Liner Adhesive and DP 2595 Closed Cell Foam Adhesive canisters.


Get in touch to learn more
Speak to us on 800-325-7040
Contact us



















