DP 1010

Features

Premium grade with smooth consistency for coverage
GREENGUARD Gold Certified
LEED V4 Qualified
UL Listed
Low VOC
Meets Requirements of NFPA 90A & 90B, ASTM E-84, and UL-723
Excellent Water and U.V. Resistance
Meets CDPH Emission Requirements
Excellent Workability
Meets FDA, USDA, and EPA Standards
Crack and Peel Resistant
Mold and Mildew Resistant
Excellent Dry Adhesion
Indoor and Outdoor Usage
Sag Resistant
Paintable with latex or epoxy paints after cured

Properties

Color

Gray

Base

Water

Chemical Family

Synthetic Latex

Solids Content

70 ± 2%

Viscosity

Approx. 300,000 - 400,000 cps

Shore A Hardness

Greater than 20

Application Temperature

40°F - 110°F

Storage

40°F - 110°F. Do not freeze. If product freezes, allow to return to room temperature before applying

Freeze/Thaw Stability

5 cycles no deterioration (DPTM-20)

Service Temperature

-25°F - 200°F

Flammability

Non-flammable wet or dry

Flash Point

No flash to boiling

Shelf Life

2 Years (unopened containers)

Cure Time

24-72 hours depending on temperature, humidity, and application

Coverage

Dependent on application thickness, 40-80 sq. ft. at 20-40 wet mils

Clean Up

Use warm water and soap

Packaging

1/12 gallon tubes, 1 gallon pails, 5 gallon pails, 54 gallon drums

Pressure Classes

Meets all SMACNA pressure classes

Seal Classes

Meets all SMACNA seal classes

VOC

≤ 3 g/l

Downloads

Type

Document Name

File Size

Technical Data Sheet

Document Name DP 1010 TDS

File Size 853.5 KB

View

Safety Data Sheet

Document Name DP 1010 SDS

File Size 231.1 KB

View

Certifications

Additional information

Brand:

Design Polymerics

Technology:

Acrylic

Application:

Building Envelope and Components HVAC

Market:

Building Construction

Available Packaging

Size

Part Number

Quantity

Picture

Size 1/12 GALLON TUBES (10.2 oz)

Part Number TEMP

Quantity 1

Picture

Size 1 GALLON PAILS

Part Number TEMP

Quantity 1

Picture

Size 5 GALLON PAILS

Part Number TEMP

Quantity 1

Picture

Size 54 GALLON DRUMS

Part Number TEMP

Quantity 1

Picture

Related Products

Viewing options:

DP 1015

WATER BASED DUCT SEALANT

A UL Listed, Low VOC, smooth, water based, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. The consistency of DP 1015 allows for better coverage and ease of application. It exceeds...

SDS TDS

DP 1090

WATER BASED DUCT SEALANT

A Low VOC, solvent based, premium quality, UL Classified, high pressure/high velocity duct sealant for commercial and industrial supply and return air duct use. DP 1090 can be easily caulked or brushed when temperatures reach 0º F, allowing...

SDS

DP 502

100% RTV SILICONE SEALANT

A high-performance HVAC, industrial, commercial, and residential construction grade 100% Acetoxy RTV Silicone adhesive/sealant that is UL and NSF Recognized. It has excellent resistance to aging, weathering, and UV degradation. DP 502 will provide long term performance on...

SDS

DP 2595

CLOSED CELL FOAM SPRAY ADHESIVE

A premium quality, solvent based, high performance, fast drying, non-flammable, industrial contact insulation adhesive that is water resistant and temperature resistant to 200°F. DP 2595 is formulated for adhering closed cell foam, higher density insulation and applications that...

SDS

DP 1010 Spray

WATER BASED DUCT SEALANT

A premium grade, UL Listed, Low VOC, smooth, water based, UL Listed, high pressure/high velocity duct sealant for commercial and residential supply and return air duct use. DP 1010 Spray is specially formulated for application by airless sprayers...

SDS TDS

DP 503 HIGH TEMP RED

100% RTV SILICONE SEALANT

A high-performance HVAC, industrial, commercial, and residential construction grade 100% Acetoxy RTV Silicone adhesive/sealant that can withstand extreme heat while maintaining its physical properties. DP 503 has excellent resistance to aging, weathering, and UV degradation and will provide...

SDS