EPO-TEK® MED-320 - Biocompatible Nonconductive Adhesive

SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...

ULTRABOND® EPX-3CC is everything you need, and nothing you don’t, because it’s the perfect balance between high performance and high volume. With an installation temperature range of 48 °F to 108 °F, and a full cure in 4...

A premium quality, solvent based, high performance, fast drying, polystyrene insulation adhesive. DP 2585 is water resistant and temperature resistant to 180° F. It is ideal for bonding polystyrene, polyisocyanurate and phenolic foam insulation sheets and block without...

A foil backed butyl mastic rolled sealant tape that is fully cured, high pressure/high velocity rated for use on commercial and residential supply and return air ducts. DP Foil Mastic Tape is pressure sensitive and requires no cure...

100% solids silver-filled epoxy system for chip bonding in microelectronic and optoelectronics.

Hoses for DP 2590 Duct Liner Adhesive and DP 2595 Closed Cell Foam Adhesive canisters. AVAILABLE IN 12 FT. LENGTHS.