Features
Properties
Downloads
Safety Data Sheet
Certifications
Related Products
ULTRABOND® HS-200
High-Strength, DOT Approved Anchoring Epoxy
With extensive DOT approvals, ULTRABOND® HS-200 is ideal for anchoring threaded rod, bolts and rebar dowels into concrete. With a long working time of 24 minutes and multiple embedment depth design tables, this anchoring epoxy offers a 2:1...
CRACKBOND® EPOTHANE T3
Epoxy-Urethane Hybrid Type III Overlay
CRACKBOND® EPOTHANE T3 is a low-modulus, epoxy urethane skid-resistant overlay. It may be successfully applied and cured at temperatures between 60 °F and 95 °F (16 °C and 35 °C).
CRACKBOND® JF
Flexible Polyurea For Filling Control Joints, Saw Cuts and Active Cracks
This elastomeric, Polyurea joint filler (formerly known as JF-311) allows 10-15% movement of installed joint width and can be used in temperatures between -40 °F to 120 °F (-40 °C to 49 °C). Available in cartridges and in...
ULTRABOND® 1
Over 20 Years of Trusted Performance
Tried and true for more than 20 years, ULTRABOND 1 has numerous DOT approvals and is available in bulk and cartridge in a multitude of sizes with a 1:1 mix ratio that makes it much easier to use....
ULTRABOND® HARD-ROK
High Strength, Fast Setting Cementitious Anchoring Grout
For anchoring threaded rod and rebar, railings, sign posts and parking meters, or patching holes and cracks in roads and sidewalks, ULTRABOND® HARD-ROK contains no metals to cause rust or stains and is suitable for interior or exterior...
Get in touch to learn more
Speak to us on 800-892-1880
Contact us