EPO-TEK® 360T - High Temperature Thixotropic Epoxy

EP75-SEAL is a highly penetrating, two-component epoxy healer/sealer. Its rapid cure time allows traffic to re-open in less than six hours.

Thermally conductive, electrically insulating epoxy designed for heat sinking electronics and semiconductors. It may be used as an adhesive, potting, or encapsulation material, for industries such as consumer or optics.

Single component, electrically insulating, thermally conductive epoxy adhesive designed for heat-sinking of semiconductors, hybrids, electronics, and optics. 

A foil backed butyl mastic rolled sealant tape that is fully cured, high pressure/high velocity rated for use on commercial and residential supply and return air ducts. DP Foil Mastic Tape is pressure sensitive and requires no cure...

Optically clear, low stress, capillary grade semiconductor underfill. It is clear and colorless and capable of curing at low temperatures in the range of 23ºC to 80ºC, suggested for opto-device flip chip packaging. It can also be used...

ULTRABOND® EPX-3CC is everything you need, and nothing you don’t, because it’s the perfect balance between high performance and high volume. With an installation temperature range of 48 °F to 108 °F, and a full cure in 4...