EPO-TEK® MED-323LP - Biocompatible Optical Adhesive

Optically transparent and semiconductor grade epoxy resin with low viscosity, long pot life and good handling characteristics. 

Repairable epoxy rubber for low stress encapsulation. Also available as the premixed and frozen F50-3170BK.

Thermally conductive, electrically insulating epoxy designed for heat sinking electronics and semiconductors. It may be used as an adhesive, potting, or encapsulation material, for industries such as consumer or optics.

For use in cracked and uncracked normal weight and lightweight concrete, ULTRABOND ACRYL-8CC has a full cure rate of 45 minutes at 70° F (21° C) and an 18-month shelf life. With an extended in-service temperature range of...

SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...

ASI Compound 70 Multi-Purpose Silicone Grease is a moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F to 400°F.This stiff, tacky compound is non-melting and retains its properties over extended periods...