EPO-TEK® MED-H20E
Biocompatible/Electrically Conductive(ECA), Silver, Medical Grade Epoxy
ISO 10993 biocompatible electrically conductive (ECA) silver-filled epoxy with electrical and high thermal conductivity. It is a well characterized and relied upon ECA, with over 40 years of successful design use.
EPO-TEK® MED-HYB-353ND
Medical Grade Epoxy
An ISO 10993 Medical grade, single component, UV hybrid curing epoxy for semiconductor, and fiber optic applications.
EPO-TEK® MED-OG198-55
Biocompatible, Shadow Curable Capable, UV Curing Epoxy
ISO 10993 Biocompatible Shadow Cure Capable UV curing epoxy. A translucent cationic/epoxy UV with high viscosity, high Tg, and high strength.
EPO-TEK® MED-T7110
Medical Grade Epoxy
ISO 10993 Medical grade thermally conductive epoxy, electrically insulating, low temperature curing epoxy. Ideal for temperature sensitive devices.
EPX50-OVERLAY
Moisture-insensitive, low-modulus epoxy-urethane co-polymer overlay resin
EPX50-OVERLAY is a moisture-insensitive, low-modulus, 3/8” two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as...
DOT Approval File
EPX50-OVERLAY FAST
Fast setting, low -modulus, epoxy urethane co-polymer
EPX50-OVERLAY FAST is a fast-setting, moisture-insensitive, low-modulus, two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as a binder...
EPX50LT-OVERLAY
Cold weather, low modulus, epoxy urethane co-polymer
EPX50LT-OVERLAY is a moisture-insensitive, low-modulus, epoxy urethane co-polymer overlay resin, designed to be applied in late season cold conditions down to 30 °F and rapid return to service applications.
Finale®
Hard-Set, elastomeric Cove Base Adhesive
Cross the finish line first with Finale. With its immediate grab, Finale holds the pressure of inner and outer corners, allowing you to give your job site the final touch. Finale works flawlessly over multiple surfaces and has...
Gravity™
Anti-Skid Substrate Coating for Floating Floor Installation
When you are wanting to install loose lay LVT/LVP without adhering them to the substrate Taylor Gravity® is the solution. Taylor Gravity™ is an anti-skid coating that enables the flooring installer or do it yourselfer to simply apply...