CONVERGENT Pentra® PCF
Concrete Pore and Crack Filler
Pentra® (PCF) is an industry-leading liquid pore and micro-crack filler for concrete grinding and polishing. This reactive treatment mixes with the dust created during concrete grinding to fill pinholes, microcracks and other imperfections in the concrete surface. It...
CONVERGENT SlabArmor™ Closer
Colloidal Silica Concrete Densifier/Hardener
SlabArmor™ Closer is the second step in the SlabArmor system. This colloidal silica densifier/hardener is applied after power troweling has been completed. A single application is applied to the surface and requires no scrubbing or rinsing. Its reactive...
CONVERGENT SlabArmor™ Seal&Shine Finish
High-Performance, High-Gloss Concrete Finisher and Sealer
Seal&Shine Finish is the final step in the SlabArmor™ system, intended to be applied after the placement and finishing process. This high-performance, high-gloss finish, seals, protects and extends the life of your SlabArmor™ floor, eliminating the need for...
CONVERGENT SlabArmor™ Starter
Colloidal Silica Concrete Curing/Finishing Aid and Hardener
SlabArmor™ Starter is a colloidal silica concrete curing/finishing aid and hardener used in the placement and finishing of new concrete. Its hydrophilic property holds bleed water in the capillaries of the concrete slab during the curing process, reducing...
CONVERGENT STRiON:FORTIFY
Spray On Concrete Densifier
STRiON:Fortify is a revolutionary new method of concrete densification and hardening. Using groundbreaking new silica-free technology, STRiON relies on an ionic transfer process to disperse deep into concrete to make it more resilient, resistant to traffic, dustproof, easy...
CONVERGENT STRION:FORTIFY MAX
Premium Concrete Densifier and Sealer
Not only is it remarkably easy to apply, but it can be applied at temperatures as low as 25°F – and no rinsing is required, making it not only simple but also easy on the environment. It can...
CRACKBOND® 2300 GEL
High Strength Gel Bonding Adhesive
CRACKBOND® 2300 GEL (formerly ULTRABOND® 2300) is a two-component, 100% solids, high-strength epoxy bonding adhesive. It is a solvent free, high modulus, moisture insensitive, non-sag epoxy system. CRACKBOND® 2300 GEL is ideal for use in temperatures from 60°F...
CRACKBOND® BRIDGE-GARD
Epoxy Concrete Overlay
CRACKBOND® BRIDGE-GARD is a multi-purpose epoxy polymer concrete overlay system designed for high-stress infrastructure applications. It may be successfully applied and cured at temperatures between 65 °F and 95 °F (18 °C and 35 °C).
CRACKBOND® CSR
Low Viscosity Adhesive
2-component polyurethane hybrid formulations. Extreme low viscosity and rapid cure for quick repairs of cracks and spalls in concrete. Find a selection of concrete repair and restoration adhesives for buildings and transportation infrastructure.