EPO-TEK®H20E-SLR-HV
Electrically Conductive, Silver Epoxy
This is a two-component, electrically conductive, epoxy adhesive designed for solar ribbon bonding of photovoltaic modules. It provides the electrical back-contact for ribbon stringing of solar cells into modules and panels. It is a higher viscosity version ofEPO-TEK®...
EPX50-OVERLAY
Moisture Insensitive Epoxy Polymer Overlay
EPX50-OVERLAY is a moisture-insensitive, low-modulus, 3/8” two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as...
EPX50-OVERLAY FAST
Rapid Set Epoxy Urethane
EPX50-OVERLAY FAST is a fast-setting, moisture-insensitive, low-modulus, two layer chemical and waterproof epoxy urethane co-polymer overlay that provides an anti-skid surface for bridge decks, elevated slabs and PCCP. It may also be used for high friction surface treatment applications and as a binder...
EPX50LT-OVERLAY
Epoxy Urethane Polymer Resin
EPX50LT-OVERLAY is a moisture-insensitive, low-modulus, epoxy urethane co-polymer overlay resin, designed to be applied in late season cold conditions down to 30 °F and rapid return to service applications.
Finale®
Elastomeric Cove Base Adhesive
Cross the finish line first with Finale. With its immediate grab, Finale holds the pressure of inner and outer corners, allowing you to give your job site the final touch. Finale works flawlessly over multiple surfaces and has...
Gravity™
Anti-Skid Substrate Coating
When you are wanting to install loose lay LVT/LVP without adhering them to the substrate Taylor Gravity® is the solution. Taylor Gravity™ is an anti-skid coating that enables the flooring installer or do it yourselfer to simply apply...
HFP 1:1
Advanced Surface Polymer
HFP 1:1 is a moisture-insensitive, low-modulus, two component, high friction surface polymer designed for binding high friction surfacing aggregates to asphalt, concrete on grade and elevated surfaces.
Hot Melt Adhesives
Evans Adhesive's hot melt adhesives provide fast-setting, durable bonds for packaging and converting industries, offering reliable performance, efficient application, and strong adhesion to meet the demands of high-volume production environments.
